Dewalt 611dp. Router needed new bearings. Upon disassembly, found that the collet end bearing is seated in a plastic bearing housing insert and held there with a plastic spanner nut. Nut was impossible to remove without damaging it because heat generated from use, caused it to be seized. had to carefully remove it by partially cutting tr
... Read moreough it in several places. Had to then clean out the remaining plastic from the threads in the housing. The bearing was also frozen in the insert and decided just to order a new insert along with the spanner nut. Already had the bearings from previous order. Also decided to replace the magnet which is inside a plastic casing which threads onto the commutator end of the armature. Would advise anyone replacing bearings to order these parts also to avoid repair delays. Not a difficult repair after dealing with the cheap plastic design members.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of A27330 DeWALT Magnet")
_WW_1.gif "Part Location Diagram of A27330 DeWALT Magnet")
