OEM Milwaukee Saw Parts & Accessories

$21.57

Manufacturer Part Number:: 45-16-0645

This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is e...

Shoe Pin

★★★★★

(7)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 44-60-1635

This is a genuine OEM sourced replacement part designed for use with Milwaukee sawzall reciprocating saws. This shoe pin secures the shoe retainer. It is made of metal and it is sold individually. To complete this repair you would need a screwdriver and pliers.

Switch

★★★★★

(5)

$33.27

Manufacturer Part Number:: 23-66-2635

This is an on/off switch for various models of circular saws. This switch is located near the main handle assembly of the saw and responsible for toggling the power to the saw. This switch is made of durable black plastic and features a single toggle that the user presses to turn the saw on. Over time and through extended use, this switch can wear out and fail, at which point it needs to be tested...

Rear Roller Kit

★★★★★

(4)

$20.65

Manufacturer Part Number:: 42-28-0025

This rear guide roller kit is an OEM item which is specially designed for Milwaukee band saws. The purpose of this component is to support and guide the blade. It is an identical replacement for a missing or a faulty item that was installed on a new unit. Note, this is the rear guide, the front guide is sold separately. Make sure to refer to the appropriate diagrams of your model for the correct l...

Pulley Tire

★★★★★

(9)

$5.95

Manufacturer Part Number:: 45-69-0030

This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...

Sleeve Bearing

★★★★★

(8)

$5.95

Manufacturer Part Number:: 42-40-0580

This is a genuine Milwaukee replacement part, it is sold individually. These sleeve bearings are installed on the Blade Pulley Axles on the Milwaukee Bandsaw models shown below. They fit inside of the Blade Pulleys When the blade on the bandsaw is not tracking properly, it may be time to replace them. There are four of these on each tool. This also would be a good time to replace the 45-69-0010 Bl...

Carbon Brush

$5.95

Manufacturer Part Number:: 22-18-0025

This manufacturer sourced replacement part is designed for use with Milwaukee band saws. It includes one (1) carbon brush with lead wire and a spring attached. Carbon brushes are commonly replaced item on power tools Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace bot...

Brush Holder Assembly

★★★★★

(3)

$5.95

Manufacturer Part Number:: 22-20-0535

This is a genuine Milwaukee replacement part, it is sold individually. 2 are needed for the tools shown below. It includes the Brush and Brush Holder. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electri...

Outer Flange Blade

★★★★★

(7)

$7.62

Minimum Quantity of 2 required

Manufacturer Part Number:: 43-34-0795

This is an original Milwaukee replacement item designed for use with circular saws. It is supplied by original equipment manufacturer. This item helps to secure saw blade to the spindle/shaft. This is a metal outer flange and it is sold individually. Please note you would need a wrench to remove the blade bolt when replacing a flange.

Blade Pulley Tire

★★★★★

(50)

$17.07

Manufacturer Part Number:: 45-69-0010

This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...

Brush Assembly

★★★★★

(8)

$6.15

Manufacturer Part Number:: 22-18-0075

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most c...

Washer

★★★★★

(3)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 45-88-1560

This is a washer designed for use within various models of circular saws. This is a flat washer that is used within the gear case assembly to secure the shoe assembly, the part that guides the saw and prevents digging, to the saw. This washer serves multiple different purposes on the saw, so it can be used in a variety of different applications.

Milwaukee Saw Parts

Top Milwaukee Saw Models

Popular Milwaukee Saw Parts

Milwaukee Saw Models

Milwaukee Saw Parts

Search By Model or Part Number

Top Milwaukee Saw Models

Popular Milwaukee Saw Parts

Milwaukee Saw Models