Makita Die Grinder Parts
We sell only genuine OEM Makita ® parts.
Top Makita Die Grinder Models
-
Makita GD0601 1/4" Die Grinder Parts
-
Makita GD0600 Paddle Switch Die Grinder Parts
-
Makita GE0600 Die Grinder Parts
-
Makita GD0800C Die Grinder Parts
-
Makita 906H Die Grinder Parts
-
Makita LXDG01 18V Lxt Lithium-Ion Cordless 1/4" Die Grinder Parts
-
Makita GD0810C Die Grinder Parts
-
Makita XDG01Z 8V Lxt Lithium-Ion Cordless 1/4" Die Grinder Parts
Popular Makita Die Grinder Parts
- Manufacturer Part Number:
- 418727-2
This plastic switch lever is specially designed for Makita angle grinders. It connects to the switch and allows user to turn the grinder on and off. Please note this item is sold individually. Please note the switch and switch button are both sold separately. Replacing this switch lever is a pretty simple task that can be done using a screwdriver. • Remove the rear cover • Disconnect the sw...
- Manufacturer Part Number:
- 664630-7
This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 8 Feet Long
- Manufacturer Part Number:
- 417813-6
This is a genuine manufacturer sourced replacement part designed for use with Makita grinders/polishers. This knob controls the switch which handles the on/off functions. It is made out of black plastic and it is sold individually. To replace this knob you would need pliers to open up the housing.
- Manufacturer Part Number:
- 763625-8
This is a genuine OEM sourced replacement part designed for use with Makita die grinders. This part provides a grip for holding a bit in a tool. It is made out of metal and is sold individually. This collet is for using bits with 1/4" arbors only. Please note the collet nut is sold separately. Due to prolonged, heavy use a collet adapter may need to be replaced eventually. To replace this item y...
- Manufacturer Part Number:
- 324639-8
This is an authentic replacement part manufactured for use with Makita die grinders. The coupling is used to connect the spindle and armature. This coupling is sold individually, please note two may be required.
- Manufacturer Part Number:
- CB325
Genuine Makita replacement part. Set of 2 Carbon Brushes with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through...
- Manufacturer Part Number:
- CB340
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can ...
- Manufacturer Part Number:
- 211101-1
- Manufacturer Part Number:
- 650579-7
This is a Push-Button type switch that has 4 terminals, 2 internal and 2 external. This genuine Makita replacement part is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degr...
- Manufacturer Part Number:
- 643760-7
This is an OEM Makita authorized replacement part used on variety of Makita Power Tools. This part is sold Individually and it includes the spring. The brush holder in keeps the brushes in place and pushes them against the armature with spring pressure. If the Brush holder is broken or bent it needs to be replaced.
- Manufacturer Part Number:
- 419566-3
- Manufacturer Part Number:
- 763664-8
This collet nut is a high quality replacement part commonly used on Makita die grinders. It is an authentic item that is supplied directly from original equipment manufacturer. This nut allows user to secure the collet to the shank. This part is made from durable metal and is sold individually. You should only need a wrench to secure or remove this item.
Makita Die Grinder Models
-
Makita GD0601 1/4" Die Grinder
-
Makita GD0600 Paddle Switch Die Grinder
-
Makita GE0600 Die Grinder
-
Makita GD0800C Die Grinder
-
Makita 906H Die Grinder
-
Makita LXDG01 18V Lxt Lithium-Ion Cordless 1/4" Die Grinder
-
Makita GD0810C Die Grinder
-
Makita XDG01Z 8V Lxt Lithium-Ion Cordless 1/4" Die Grinder
-
Makita LXDG01Z 18V Lxt Lithium-Ion Cordless 1/4" Die Grinder
