Sander Grinder Parts
We sell only genuine OEM parts.
OR
Popular Sander Grinder Product Types
See All
Popular Sander Grinder Parts
- Manufacturer Part Number:
- 22-18-0680
Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is bec...
- Manufacturer Part Number:
- 1607014194
Carbon Brush Set
- Manufacturer Part Number:
- 1604460092
- Manufacturer Part Number:
- 901266
This is a genuine Porter Cable replacement part, it is sold individually. A Cord Strain Reliever is used on most all power tools. It purpose is to reduce the bending of the cord as it comes out of the housing, which otherwise would cause the cord to crack and wear.
- Manufacturer Part Number:
- 1600A01CU1
Hook and Loop Rubber Backing Pad
- Manufacturer Part Number:
- 596134901
It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the corre...
- Manufacturer Part Number:
- 44-40-0035
Genuine Milwaukee replacement part, this item is sold individually. This Flange nut is threaded on the spindle of the Milwaukee Grinders shown below. You first place the inner flange on the spindle , part number 43-34-0036. Then you place the grinding wheel of choice on the spindle. The Flange Nut is then threaded on the spindle preferably by using a spanner wrench which fits into the holes of the Flange Nut.
- Manufacturer Part Number:
- 664064-4
Length 8 Foot
Length: 6'
Gauge: 18
Wires: 2
Type: Bare Wire
This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Makita power tools. A cracked or damaged cord should be replaced before continuing to use the tool. This rubber insulated cord is sold individually. It comes with a rubber sleeve grommet that is not sol...
- Manufacturer Part Number:
- N373679
This pad assembly (PSA), commonly referred to as a sanding disc, is an original manufacturer part used in orbital sanders. It has four attachment points and a diameter of 5 inches. It features a Velcro backing on one side which allows it to securely hold the sandpaper in place during operation for efficient smoothing of surfaces. If the pad breaks, becomes dislodged, or is unable to hold the sandp...
- Manufacturer Part Number:
- 660797002
This is a Genuine OEM Ridgid replacement part, this part is sold individually. The purpose of this screw is to hold the sanding pad of the Ridgid R2611 Random Orbit Sander to the 513520002 Brake Pad. Only use the properly sized Hex Tool or Flatehead Screwdriver to tighten and loosen this bolt. Make sure the screw is tight but not overtightened.
- Manufacturer Part Number:
- 43-34-0036
Genuine Milwaukee replacement part, this item is sold individually. The 43-34-0036 Disk Flange is installed first on the spindle of the grinders listed below. You can then place the grinding wheel or cutoff wheel next. Then the threaded flange nut is tightened on to the spindle to hold the grinding wheel on the spindle.
- Manufacturer Part Number:
- 316046900
This is a genuine Metabo replacement part, it is sold as a set (2). Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meanin...
