A genuine item which is supplied directly from the original equipment manufacturer for use with DeWALT planers. It is a special felt seal for the main roller, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable material and is sold individually. Over time it may wear out and begin to crack eventually requiring a replacement.
1- Disconnect the power
2- Remove both side covers and both side shields
3- Remove the roller gears and chains from both ends.
4- Slide blocks in and lower the planer down to just about to tough the blocks.
5- Remove the retainer clips at each end, then slowly raise the planer until you can remove the roller.
... Read more>6- Keep the bus hinging in place on the original in order to see how to assemble the new assemblies.
7- Set the new roller and bushings in place on top of the wood blocks.
8- Start to lower the planer head and help guide the springs back into the pockets above the bushings. Continue to lower the head until just short of fully seated.
9- Tighten the screws to secure the retaining clips at each end. Once snug, slide the wood blocks out. Follow the reverse of steps 1-3 to complete the repair.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
