This is an authentic OEM part which is designed for use with DeWALT planers. It is a standard hardware which helps to secure a component on a shaft. This is an identical replacement for a damaged or a faulty part that was installed on a new unit. Check the appropriate diagrams for your model for the exact location and the correct installation of this retaining ring. You will need a screwdriver to take apart the housing and snap-ring pliers to remove the old part and secure the new one. One durable metal retaining ring is included.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Retention ring
Part fit and is operating well. It meets all expectations.
Ted - September 7, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair thanks to ereplacementparts
Easy fix!
Iglobal - March 14, 2023
Verified Purchase
★★★★★
★★★★★
Great parts
While the website was easy to navigate and the parts worked out great the shipping was a problem. I payed for 2 day shipping and received them in 4 days.
Guest - May 16, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Raise planer head all the way up so you can access phillips screws on bottom cover. Very easy remove side cover and bottom plastic cover with short phillips screw driver. Find why feed rolls do not work. It will be a drive sprocket or chain that is broke. Do not take chain apart when replacing sprocket. Remove outside sprocket to replace
... Read moreinside sprocket. Place new sprocket in chain and walk it back or forward to line up the key in the key way. Slide on outside sprocket with chain on it place retainer clip on shaft to hold sprockets. put side panel on and replace bottom cover and you are ready to go.
1.removed top
2. cranked cutterhead up as far as possible.and turned over machine
3. removed drive chains and sprokets from rollers
4. removed bottom plate.
5. removed phillips head screws securing roller bearing with visegrips. Impossible to turn with phillips head scredriver
6. removed rollers, cleaned and
... Read more regreased bearings rollers now turn smoothly
7. reassemble in reverse order with new chains
I have to check that the planer produces a board of uniform thickness.
Removal covers pulled out support rods removed motor cutter roller assembly replaced roller bushing chains and sprockets . Reassemblied back to working order.
Went well with all the necessary parts on hand THANKS
Replaced broken chain and sprocket. Cleaned feed rollers and waxed feed bed. Machine works like new again. Thanks for your quick delivery. If other parts are needed I will order from your company.
1. Complete disassembly planer
2. Screws holding bushing stripped.
Two screws removed with drill and extractor.
One screw drilled out, hole re-tapped.
Bushing replaced.
Reassemble
Works like a charm
Remove retaining rings take off both sprockets on one chain. I then put both back on at same time. Then put retaining rings on and cover.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
