Part Location Diagram of LB0016 Senco Seal
See part 76 in the diagram
( Grid squares measure 1x1 inch )

Seal LB0016

Manufactured by:
Senco
ERP Number:
ERP10074413
Part Number:
LB0016
Original Equipment Manufacturer ?
  Works with your model  M1!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(4 rated repairs) ?
  Works with your model   M1!

Product Description

?

This is an authentic manufacturer sourced replacement part, it is specially produced for use in Senco staplers. It is the item that provides and air-tight seal for the valve assembly. Over time the material may shrink, become brittle and crack eventually requiring replacement to maintain peak performance. It is made of durable rubber material and it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Just had to replace a broken part

Dale from Jarrettsville, Maryland

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
I decided to clean out and replace the seals in the gun. Cleaned all the internal moving parts , replaced all the o-rings and the valve assembly, put it all back together and It works fine now.
Lay out all the new parts and as you remove the one old one replace it with the new one.
Did you find this story helpful?
Thank you for voting!

Air leak

Norman from CLOVIS, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Unscrewed staple gun, pulled it apart, replaced all seals.
Did you find this story helpful?
Thank you for voting!

Leaking air out the top would not shot no staples

David from Pottsville, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
LB0765, LB0118, LB0116, LB0018, LB0016
Took the 4 Allen screws out removed top pull piece out of cylinder replaced all the seals push it back in reinstalled top and Screws and presto fixed works like new.
Did you find this story helpful?
Thank you for voting!

bad seal

Thomas from WAYLAND, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
LB5012, LB0116, LB0018, LB0016
Replaced seal
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10074413
Manufacturer Part Number: LB0016
Brand Model Number Description
Senco K Nailer - (G4450-1) Stapler
Senco KN4450-1 Nailer - Senco K-(Kn4450-1 1-4) Parts
Senco L Nailer - (G4450-1) Staper
Senco LN4450-1 Nailer - Air Nailer
Senco LS Nailer - Stapler
Senco LS1 Electric Drill - 18 Ga. Headless Pinner
Senco LS118Ga Nailer - Ls1 Headless Pinner
Senco LS2 Nailer - Stapler
Senco LS4 Nailer - Stapler
Senco LS5 Nailer - Stapler
Senco M1 Nailer - Stapler
Senco M3 Nailer - Stapler
Senco M4 Nailer - Stapler
Senco SJ10 Nailer - Fine Wire Stapler
Senco SJS Nailer - Fine Wire Stapler
Senco SNS50 Nailer - Stapler
Senco SNS50XP Nailer - 16 Ga. Heavy Wire Stapler
Senco SNS50XP16Ga Nailer - 1-1/4-Inch - 2-Inch 16ga Contact Stapler (Sns50xp)
Senco SQS55 Nailer - Stapler
Senco SQS55XP Nailer - 15 Ga. Heavy Wire Stapler
Senco SQS55XP15Ga Nailer - Sqs55 15 Gauge Heavy Wire Stapler