Genuine OEM Piston Retainer for Senco Nailers. This part is made out of Plastic and is sold Individually. Over time due to constant pressure on this part, it will break or crack. Damaged Retainer would leak air and would need to be replaced for the Nailer to operate properly.
Removed the four top cap allen screws, blew all the pieces of old retainer from nailer body, replaced seals and retainer not using any tools, then reassembled nailer.
Remove the top, replace the retainer and clean all of the parts and pieces of the old retainer out of the gun. Very important that you get all of the pieces.
Replace the top.
Very easy fix. I removed 4 screws from the top and removed the head. The retainer was screwed to the underside. Only a piece of the old one remained. I cleaned out the broken pieces, installed the new one, and put the head back on. Works like new.
Download a parts breakdown of the Frame Pro 650 Senco that shows where all repair parts are located. Remove top housing cover to expose the internal parts. Use utility knife to get o-rings out of groves, wipe all debris off each part and install new o-rings. After o-rings are replaced replace the upper and lower stops. Assemble parts in t
... Read morehe proper place. Put nails into the magazine, connect the air hose from a working air compressor. Check for air leaks, and test fire a few nails into suitable wood.
removed the back cover, opened up the nailer, located the broken part, ordered 2 firing valves and some orings, cleaned it up reassembled and it worked.
1. Remove top of nail gun.
2. Part is in sight--remove and replace part.
3. Clean all of the broken parts from the gun , then oil the inside.
4. Reassemble the nail gun
I pulled the top of the gun off then pulled the trigger assembly apart, replaced all the seals,then I pulled the retainer housing over the piston ,cleaned all the broken parts of the retainer ,then I replaced the retainer...reassembled the gun and it works perfectly again..
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10071865
Manufacturer Part Number: BF0204
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of BF0204 Senco Retainer")
_WW_1.gif "Part Location Diagram of BF0204 Senco Retainer")
