Part Location Diagram of C061000100 Echo Backpack Blower Strap
See part A-13 in the diagram
( Grid squares measure 1x1 inch )

Backpack Blower Strap C061000100

Manufactured by:
Echo
ERP Number:
ERP9315607
Part Number:
C061000100
Original Equipment Manufacturer ?
  Works with your model  PB-6000!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(16 rated repairs) ?
  Works with your model   PB-6000!

Product Description

?

Genuine Echo replacement part, this item is sold individually. Two of the Backpack Harnesses are needed for the Back Pack Blowers shown below. It does include the mounting hardware to attach it to the Blower. The Backpack harness is padded for comfort when using the Blower.

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Leaf Blower / Vacuum

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(14 Reviews)
Click to filter by ratings:
  • 5 stars
    14
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(16 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Straps worn out and about to break. One blower tube missing and flex had hole in it

Lee from Easley, South Carolina

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Watch as you remove the bad parts carefully and reverse the process to install the new parts. I would also like to ad that the ereplacementparts.com site did an outstanding job getting my order together and out the door. The price was also about 15% below local dealers and arrived in a couple of days. Also ordering is so simple because of the way the site is laid out. Blown up illustrations of you parts help to make sure you are ordering what you need.

Very pleased with the entire experience and my old blower looks good and works like it did when it was first bought. Thanks and I will use you again.
Did you find this story helpful?
Thank you for voting!

Straps were worn out and need replacing.

Roy from Long Beach, Mississippi

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
C061000100
Removed two nuts and removed old straps. Put new straps on machine with supplied hardware and tightened nuts. Very easy and simple.
Did you find this story helpful?
Thank you for voting!

Blower had to be choked in order to stay running (Echo Backpack Blower)

Kevin from SUFFOLK, Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Carburetor Repair Kit and Air Filter
1. Removed air filter cover and filter
2. Disconnected Fuel Lines and throttle cable to Carb
3. Cleaned Carb and port hole with Amsoil carb cleaner
4. Pulled carb apart and put new gaskets, seals, needle and screen in
*Pay attention to the layout of the gaskets and diaphra gms when pulling apart
5. Put carb back together
6. Reattached fuel lines and throttle cable
7. Put new air filter in and replaced cover
* Blower runs better than it did when it was new. Took it in for warranty issues and nothing changed when I got it back. Ran it for several years on choke but the diaphragm finally gave out.

Backpack Harness Assembly
1. Bend the hooks to remove old harness from bottom of blower
2. Push harness through the top of harness and remove plastic clips and pull harness off
3. Put bolt through holes on the new harness with washers on either side and tighten nut
4. Push harness through slots on top of blower and attach plastic clips
5. Attach metal hooks to bottom of blower and bend so they don\'t come unattached

Did you find this story helpful?
Thank you for voting!

Harness strap was worn

daniel from jarrettsville, Maryland

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
C061000100
Removed 2 screws took off old strap. Installed new strap with 2 screws about 20 minutes
Did you find this story helpful?
Thank you for voting!

Straps were very narrow with no padding

JAMES from ANDERSON, South Carolina

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
C061000100
Removed old straps and replaced with new ones / cut the old ones off since the screws were rusted.
Did you find this story helpful?
Thank you for voting!

The primer bulb cracked and 1 shoulder strap broke after 10 yrs. Amazing!

Michael from Senoia, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
P005003120, C061000100
Removed the 4 screws on the primer bulb plate and replaced primer bulb
Removed old straps and replaced with new ones. Very easy to do both repairs
Did you find this story helpful?
Thank you for voting!

The curved tube at the end was missing. The shoulder straps were worn.

Kenneth from Pine Plains, New York

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
C061000100, 21002303461
1. Attached the curved pipe to the existing pipe. Fit perfect and twist locked.
2. Removed the old shoulder straps and attached the new ones. New screws, bolts and washers identical to the originals were included and fit perfect.
Did you find this story helpful?
Thank you for voting!

Muffler was bad

james from san antonio, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Remove cage around blower then remove muffler bolts. They will probably have some metal tabs bent over bolt heads so pry them back with needle nose pliers. Replace muffler and make sure you put the new gaskets on then tighten down. Pretty easy if your bolts aren\'t rusted tight. Spray with lube and let sit. Maybe heat them with a li ttle propane torch to break them free. Worked for me and my 15 yr old bolts. Good Luck!
Did you find this story helpful?
Thank you for voting!

Straps had worn thin and needed replacing.

Steve from El Paso, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
C061000100
1. Removed old worn straps
2. Placed the end of one strap with the holes over the harness and then slipped one screw through a flat washer and then through one hole, wrapped the strap around the the harness and threaded the screw into the hole, then a flat washer and then threaded a nut onto the screw and tightened with screw driver and nut driver
3. Repeated the process on the other strap.
Did you find this story helpful?
Thank you for voting!

Throttle broke and straps broke

Loren from Roswell, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
C061000100, 17805407560
Removed old throttle and straps
installed new throttle and straps
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9315607
Manufacturer Part Number: C061000100
Brand Model Number Description
Echo LBB-4200 Leaf Blower / Vacuum - Lesco LBB-4200 (After S/N 001001)
Echo PB-260L Leaf Blower / Vacuum - Backpack Blower
Echo PB-261i Leaf Blower / Vacuum - Backpack Blower
Echo PB-261L Leaf Blower / Vacuum - Backpack Blower
Echo PB-403 Leaf Blower / Vacuum - Backpack Blower
Echo PB-403H Leaf Blower / Vacuum - Backpack Blower
Echo PB-403T Leaf Blower / Vacuum - Backpack Blower
Echo PB-413 Leaf Blower / Vacuum - Backpack Blower
Echo PB-413H Leaf Blower / Vacuum - Backpack Blower
Echo PB-413HT Leaf Blower / Vacuum - Backpack Blower
Echo PB-4600 Leaf Blower / Vacuum - Backpack Blower
Echo PB-460LN Leaf Blower / Vacuum - Backpack Blower
Echo PB-461LN Leaf Blower / Vacuum - Backpack Blower
Echo PB-46HT Leaf Blower / Vacuum - Backpack Blower
Echo PB-46LN Leaf Blower / Vacuum - Backpack Blower
Echo PB-600 Leaf Blower / Vacuum - Backpack Blower
Echo PB-6000 Leaf Blower / Vacuum - Backpack Blower
Echo PB-601 Leaf Blower / Vacuum - Backpack Blower
Echo PB-602 Leaf Blower / Vacuum - Backpack Blower
Echo PB-603 Leaf Blower / Vacuum - Backpack Blower
Echo PB-60HT Leaf Blower / Vacuum - Backpack Blower
Echo PB-610 Leaf Blower / Vacuum - Backpack Blower
Echo PB-611 Leaf Blower / Vacuum - Backpack Blower
Echo PPF-211 Pole Saw - Power Pruner Fixed Shaft