This is an original part from MTD. This high-quality item was designed for use in lawn tractors and is used to deliver the electric current from the ignition system to the internal combustion engine. Over time spark plugs will get dirty or fouled requiring replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. One item is included per order.
Lift the front of the tractor and put jacks underneath it. Remove the blade nuts from the spindle. Then remove the dull blades. Place the new blades on the spindles and tighten the blade nuts. Then I removed the old spark plug, then gapped the new one at 0.030 then installed it. I then used a nut and bolt to attach the mulch plug to the t
... Read moreractor.
Read less
Did you find this story helpful?
Thank you for voting!
Repaired bushing on steering gear and general tuneup & changed the oil
1. Removed engine cover
2. Removed old armature magneto
3. Installed new magneto, set gap tolerance as per instructions
4. Using grease installed boot onto plug wire.
5. Removed old spark plug
6. Set gap on new spark plug and installed
7. Installed new plug wire and boot on spark plug
8. Reinstall
... Read moreed engine cover
Drained the oil, removed old oil filter. Spread a little oil on the new oil filter to make a better seal, then installed the new filter. Added fresh oil. Replaced inline fuel filter. Removed the air filter cover, replace the pre-filter and the air filter. I then removed the old spark plug and set the gap on the new one at0.30 And I ordere
... Read mored an extra ignition key.
Replace the air filter
Drain the oil, remove old oil filter and replace with the new one, fill with new oil
Disconnect the old fuel filter and connect the new one
Remove the old spark plug, screw in the new one
Replaced air filter, which was very dirty.
Replaced gas filter, which was 11 years old
Replaced spark plug and gapped it to .040
Tractor fired up and has run perfect. Watch the spark plug for time used.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 759-3336 MTD Spark Plug")
_WW_2.gif "Part Location Diagram of 759-3336 MTD Spark Plug")
