Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9008056-1-M-Husqvarna-532057079-Washer-thrust .515 X .750 X .0
Part Location Diagram of 532057079 Husqvarna Washer-thrust .515 X .750 X .0
See part B-52 in the diagram
9008056-1-S-Husqvarna-532057079-Washer-thrust .515 X .750 X .0 360 view
( Grid squares measure 1x1 inch )
9008056-1-S-Husqvarna-532057079-Washer-thrust .515 X .750 X .0 9008056-2-S-Husqvarna-532057079-Washer-thrust .515 X .750 X .0 9008056-3-S-Husqvarna-532057079-Washer-thrust .515 X .750 X .0 9008056-1-S-Husqvarna-532057079-Washer-thrust .515 X .750 X .0 360 view
Part Location Diagram of 532057079 Husqvarna Washer-thrust .515 X .750 X .0

Washer-thrust .515 X .750 X .0 532057079

Manufactured by:
Husqvarna
ERP Number:
ERP9008056
Part Number:
532057079
Original Equipment Manufacturer ?
  Works with your model  ROYAL52-R52EA!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

1- 2 hours 

(2 rated repairs) ?
  Works with your model   ROYAL52-R52EA!

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an authentic OEM sourced component which is specially made for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty washer that was installed on a new unit. It provides a tight seal between connected components. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality washer is made of durable material and is sold individually.

Frequently Purchased Together

?
Washer, Shim 1/4 X 5/8 X .062
$6.16
In Stock
Minimum Quantity of 2 required
Screw Hex Wshhd Torx
$6.16
In Stock

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
  • Weed Eater
  • Craftsman
  • RedMax
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
  • Snow Blower
  • Leaf Blower / Vacuum
  • Chainsaw
Part# 532057079 replaces these:
532057079,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Auger/impeller control rod thumb that tightens the belt idler broke.

Robert from Lake View Plantation, Maine

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
532429668, 532057079
Before starting, I placed wood 6x6 (5.5x5.5) blocks under the rear sides of the frame to balance it when the blower assembly is removed. Removing the plastic bottom plate is optional but can make removing/replacing the idler spring easier. I then:
1. Removed the plastic housing over the drive and auger belt pulleys.
2. Removed 1 bolt each side of frame to back off the entire blower assembly.
3. Removed blower belt from top pulley
4. Tilted blower assembly 90 degrees to rest on snow intake face
5. Removed pin from control arm and control rod
6. Removed 2 bolts on frame that hold the blower idler assembly and released idler spring
7. Pulled broken control rod through frame from front
8. Put 2 thin washers on control rod between frame and wings on rear end of rod
9. Put control rod through hole in frame rear and re-attached the control arm and pin
10. Put washer on control rod at idler end and put rod end into matching hole on idler arm
11. Re-attached idler arm spring to idler arm
12. Re-attached idler arm with control rod in place to frame with 2 bolts removed earlier
12. Checked alignment of idler pulley with drive pulley to ensure all parts in proper place
13. Put blower belt on blower assembly pulley
14. Dropped blower assembly onto rod at front of frame and fastened with removed bolts
15. Threaded blower belt over drive pulley and around idler pulley
16. Tested operation from the operator\'s handle
17. Replaced the belt cover
Read less
Did you find this story helpful?
Thank you for voting!

Steering gear warn out

Cliff from St John, Indiana

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
531166901, 812000029, 532154404, 532136874, 532057079
Removed mowing deck.
Pull steering wheel
Unbolted bracket with steering gear
Replace warn parts with replacement
Checked alignment of steering gear
Bolted back in place
Replace steering wheel and shaft
Replaced mowing deck
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9008056
Manufacturer Part Number: 532057079
Brand Model Number Description
Husqvarna 1027STE Snow Blower - 1027 Ste - 10527ste (2004-03)
Husqvarna 10527 Snow Blower - Snowblower
Husqvarna 10527SB Snow Blower - Husqvarna Snowblower Model 10527SB Parts
Husqvarna 10527SBB Snow Blower - Husqvarna Snowblower Model 10527SBB Parts
Husqvarna 10527SBE Snow Blower - 10527 Sbe (96193001605) (2008-01)
Husqvarna 10527SBLS Snow Blower - Husqvarna Snowblower Model 10527SBLS/2008-09 (10527SBLS/200809, 10527SBLS/2008 09) Parts
Husqvarna 10527STE Snow Blower - 10527 Ste - Hl1027steb (2004-09)
Husqvarna 10530 Snow Blower - Snowblower
Husqvarna 10530SBE Snow Blower - Husqvarna Snowblower Model 10530SBE/2006-05 (10530SBE/200605, 10530SBE/2006 05) Parts
Husqvarna 10530SBEB Snow Blower - Husqvarna Snowblower Model 10530SBEB Parts
Husqvarna 1130 Snow Blower - 1130 Ste Xp (2004-07)
Husqvarna 1130SB Snow Blower - 1130 Sb (96193004300) (2008-11)
Husqvarna 1130SBE Snow Blower - 1130 Sbe (96193001703) (2007-09)
Husqvarna 1130SBEOV Snow Blower - 1130 Sbeov - 961930021 (2006-09)
Husqvarna 1130SBEXP Snow Blower - 1130 Sbexp, 96193000600, 961930006, 2006-05
Husqvarna 1130SBLS Snow Blower - Husqvarna Snowblower Model 1130SBLS Parts
Husqvarna 1130SBLSB Snow Blower - Husqvarna Snowblower Model 1130SBLSB Parts
Husqvarna 1130SBXLS Snow Blower - Husqvarna Snowblower Model 1130SBXLS Parts
Husqvarna 1130SBXLSB Snow Blower - Husqvarna Snowblower Model 1130SBXLSB Parts
Husqvarna 1130ST Snow Blower - 1130 St - Hu1130stb (2004-03)
Husqvarna 1130STC Snow Blower - Husqvarna Snowblower Model 1130STC Parts
Husqvarna 1130STE Snow Blower - Snow Blower
Husqvarna 1130STEXP Snow Blower - 1130 Stexp - Hu1130stc (2004-07)
Husqvarna 11524E Snow Blower - 11524 E, 96193007405, 2013-07
Husqvarna 11524LS Snow Blower - Snow Blower
Husqvarna 11527SB Snow Blower - 96193006400 Snow Blower
Husqvarna 11527SB96193006400 Snow Blower - 11527 Sb 96193006400, 2010-06
Husqvarna 12524SB Snow Blower - 12524 Sb (96193004600) (2009-06)
Husqvarna 12527 Snow Blower - Hvx Snow Blower
Husqvarna 12527HV Snow Blower - 12527 Hv, 96193007106, 2013-09
Washer-thrust .515 X .750 X .0
$ 6.16
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖