It is a high-quality sector gear which is supplied by the original equipment manufacturer for use with riding lawn mowers and garden tractors. This is an important component of the steering mechanism. Over time parts will wear out and may begin to fail eventually requiring a replacement. Keep in mind this sector gear is made of durable metal and is sold as an individual item. Note, the hardware to secure it is sold separately. A wrench set might be needed to perform this repair. Refer to the diagrams for your model to ensure the proper replacement procedure.
Troubleshooting
This part works with the following brands:
Husqvarna
Craftsman
Jonsered
Poulan
Weed Eater
This part works with the following products:
Lawn Tractor
Lawn Mower
Part# 532136874 replaces these:
532124034, 532136874,
★
Customer Part Reviews
?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts were as listed. Happy with every thing.
I was very happy with the updates as to how the order was coming along and the estimated time of delivery. I will definitely use your services in the future.
Thanks
Guest - June 3, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Take the entire steering mounting bracket off the chassis. It\'s only 4 bolts and you can easily get them from the bottom if you drop the deck all the way down.
Did you find this story helpful?
Thank you for voting!
Pinion gear (Shaft Assembly-Steering) and rack (Gear, Sector) finally wore down to where they didn\'t engage reliablly.
0. Park tractor with front wheels straight and somewhere where you have room to pull the mower deck out.
1. Remove mower deck. You can do the repair without removing it as a previous commenter has suggested, but you\'ll need two elbows, two wrists, and seven fingers on each arm to reach the screws that hold the bottom of the steeri
... Read moreng assembly to the chassis. So just take the deck off and it\'s quite easy after that.
2. Remove steering wheel (pop off the plastic center cap to find the big nut) and separate the upper part of the steering column from the lower.
3. Remove battery and battery tray.
4. Remove lower steering assembly by removing the 4 screws that hold it to the chassis from underneath the chassis.
5. Disassemble lower steering assembly. There is large circlip that holds it together and is kind of a pain to remove, but you don\'t need a special tool. Something thin to lay across the ends of the circlip and a hammer will do the job.
6. Replace the worn parts with the new ones and reinstall circlip. Try to do so such that the the steering shaft is more or less centered on the sector gear and at the same time, aligned so that the steering wheel will be centered when reinstalled. This will take some fiddling around but isn\'t hard.
7. Assembly is the reverse of disassembly!
Read less
Did you find this story helpful?
Thank you for voting!
Steering gear warn out
Cliff from St John, Indiana
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed mowing deck.
Pull steering wheel
Unbolted bracket with steering gear
Replace warn parts with replacement
Checked alignment of steering gear
Bolted back in place
Replace steering wheel and shaft
Replaced mowing deck
Did you find this story helpful?
Thank you for voting!
Steering shaft and sector was worn not turning as it should
Steve from Florence , Alabama
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed battery and panels covering steering rod and gear,cover on steering wheel to access rod.from there it was nuts and bolts to remove gear.put back in reverse order replacement parts were exact fit so no problems.Turns like a new lawnmower.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9009797
Manufacturer Part Number: 532136874
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
