This is a genuine OEM sourced replacement part designed for use on Toro lawn mowers. It is mounted to the side of the mower for the cut grass to be expelled out of it. This part is made out of plastic and it is sold individually. Please note the hinge bracket assembly and spring used to secure this deflector are sold separately.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
great fit!
part fit perfectly and is in use now.
Guest - May 7, 2019
Verified Purchase
★★★★★
★★★★★
Replacement of Side discharge chute
Received promptly & great to have this replacement chute which is essential in the smooth discharge of cut grass. Thx!
Guest - July 31, 2019
Verified Purchase
★★★★★
★★★★★
Perfect
The part was not new but it was in perfect condition. Fits an old mower so I was elated to be able to find the part. Staff is so helpful. This is the 2nd time I've used e-replacement parts and both times the service was fast and professional. Highly recommend!
Sharon - August 7, 2019
Verified Purchase
★★★★★
★★★★★
Super easy replacement, fit on the mower no problem.
I admit my own ignorance and did not realize the side shoot keeps wet grass clippings from building up underneath the mower and bogging down the rotating blade so I *may* have thrown out the original piece. This one fit perfectly and now I can mow the tallest, wettest Florida lawn without having to stop and wait for the blade to kick out the clippings from underneath.
Guest - August 12, 2019
Verified Purchase
★★★★★
★★★★★
Parts were easy to identify and order
Price was reasonable and parts arrived quickly.....Mower back in full service....I will use you guys again...Thanks
Dan - May 2, 2020
Verified Purchase
★★★★★
★★★★★
Very helpful service representative
I was not sure of the exact name of the part I needed for my new to me lawn mower. The lady service rep was very helpful in finding the specific part I needed. The part was inexpensive and unfortuntely the shipping was more than the part itself but I had no choice as i needed the discharge chute.
Shipping seem pretty fast and i have been happily mowing my lawn weekly.
Guest - May 27, 2020
Verified Purchase
★★★★★
★★★★★
Lawn mower chute
Perfect fit and in perfect condition
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Great place to buy from.
Parts were right
Guest - July 3, 2020
Verified Purchase
★★★★★
★★★★★
Discharge chute
Easy to look up/find, quickly sent to me. Grateful for this site.
Guest - August 3, 2020
Verified Purchase
★★★★★
★★★★★
First time for an on-line part order.
I found your web page easy to navigate -- great diagrams and fast service.
Guest - August 18, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Unbolted appropriate bolts holding belt cover and replaced belt. The guide is held on by two bolts and the belt cover on top of the mower is held by two screws from the bottom. You have to do all work from the bottom of the mower. So have something to lean the mower on so you can access bottom without emptying the gas and oil.
1. Removed the old cable with needle nose pliers and socket wrench.
2. Attached new cable with socket wrench.
3. Removed old lawn mower blade with socket wrench.
4. Attached new lawn mower blade with socket wrench.
5. Attached new lawn mower chute by hand (no tools necessary).
Did you find this story helpful?
Thank you for voting!
The tab on chute was broken, deflector fell off, ran it over
Removed old parts, took spring loaded part off old chute, installed on new, reassembled parts on mower
Spring loaded chute was tough to reassemble, had to use vice grips to hold spring while installing pin that held assembly together.
Did you find this story helpful?
Thank you for voting!
Side deflector wouldn\'t hold the chute on- the projections on the deflector had worn off
I went on line and found a similar repair and did what they did- I did easily find the part I needed on Replacement parts and got my mower going again fairly easily. At one point in the repair I had to get my wife to push in the rod while I held the spring in place but other than that I did it by myself. I was on the verge of buying a new
... Read more mower- the $40 parts saved me from that. Thanks
Removed defective shield and installed new trailing shield.
Also placed new side discharge chute.
Both tasks were completed with very little effort.
On a scale of 1-10 this was a 1.
Did you find this story helpful?
Thank you for voting!
Old drive V belt was worn out, I mulched the original side discharge
The V belt took some time due to the number of bolts and screws on the Toro LM, but that could of been due to my buddys help.
Just had to double check the side discharge install due to lighting.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Deflector or Chute","title":"Deflector or Chute","url":"/parts/lawn-and-garden/lawn-mower/deflectors-and-chutes/"},{"position":2,"name":"115-8447","title":"115-8447","url":""}]
(2010)_WW_3.gif "Part Location Diagram of 115-8447 Toro Side Discharge Chute")
(2010)_WW_3.gif "Part Location Diagram of 115-8447 Toro Side Discharge Chute")
