This item is a genuine Toro replacement part that is OEM sourced to ensure quality. The plastic knob is intended to be used with walk-behind lawnmowers. This item attaches to the height adjustment lever and is used as a grip when changing the cutting height of the deck. The lever knob is priced individually and four may be needed.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
Excellant condition
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Exact fit parts
Ordered various lawn mower and BBQ grill parts. The parts are exact fit. Recieved to parts quickerly after the ordering them. When the parts are not in stock, eReplacementPart order them from the manufacture, also receive those in a reasonable time.
Guest - June 25, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Easy order process however you if a part is on backorder they should not hold the hold order to wait for one part if you order multiple parts
Guest - July 4, 2019
Verified Purchase
★★★★★
★★★★★
Part arrived as sold.
Part was easy to install. Like new.
Mark - December 1, 2019
Verified Purchase
★★★★★
★★★★★
Having parts available is half the battle!
Getting the parts delivered quickly is essential, and eReplacements always deliver !
Guest - October 23, 2020
Verified Purchase
★★★★★
★★★★★
Fast Delivery/Easy Repair
The delivery was on time, parts fit perfectly! Great service!
Guest - April 14, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Disconnected the spark plug
2. Removed the mower blade
3. Removed plastic shroud covering the belt/pulley system and removed the rear plastic shroud.
4. Marked the location where the old cable was clamped to the underside of the deck with a Sharpie so that I would know where to clamp the new cable.
5. Removed th
... Read moree cap nut holding the cable loop to the handle.
6. Pried out the plastic pivot button out of the plastic socket, located just under where the handle end of the cable attaches.
7. Reversed the process to install the new cable.
Remove wheel, remove everything from the axle on the outside of the mower deck. Remove broken arm-spring from the part holding it (one bolt) Install new arm-spring, reinstall everything on the axle in the order it came off. Reinstall wheel. Started mower, it works great! Installed new air filter, new spark plug, new mower blade. Changed o
... Read moreil and ran mower out of gas, put away until Spring.
1. Went to your site to look at which parts had been there before they broke off and fell somewhere in the yard.
2. Ordered the parts and waited them to arrive.
3. Unscrewed the bolt-shoulder from the cutting height mechanism (a.k.a. arm pivot), allowing me to remove the wheel.
4. Slipped the new bolt that had been
... Read morecracked (screw-shoulder) into the arm pivot.
5. Re-attached the wheel.
6. Slip the spacer-wheel over the screw-shoulder.
7. Slip the screw-shoulder through the hole in the chassis.
8. Place the washer-flat on the screw-shoulder
9. Screw on the nut to the screw-shoulder.
It was much harder to replace the old bottom plate than attach the new one.
Bolts and nuts were corroded and rusted.
One the bolts were removed and the rust removed, the repair was quite straight forward.
Remove the shoulder bolt , washer, rear wheel and the pivot arm. Install the new spring arms. Reassemble all of the parts that were removed, in reverse order. I did also put two new levers on the arms.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8826626
Manufacturer Part Number: 105-3042
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2012)_WW_2.gif "Part Location Diagram of 105-3042 Toro Knob Lever")
(2012)_WW_2.gif "Part Location Diagram of 105-3042 Toro Knob Lever")
