This bearing assembly fits various models of Craftsman lawn mowers. This part is produced by original manufacturer. Bearings buffer and secure moving parts in order to reduce friction and stabilize movement. This results in smooth and steady motion. Bearings are high wear and therefore may require regular replacement. This item is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
great parts works great too
parts fit and my lawnmower works again
Guest - August 8, 2019
Verified Purchase
★★★★★
★★★★★
Easy fix great price.
The bearing was exact. Drive wheel fit right. Parts came in 4 days by snail mail. Definitely buy my next parts from.you.
Guest - April 21, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, part worked better than original
Good service even in time of Covid pandemic
Richard - May 1, 2020
Verified Purchase
★★★★★
★★★★★
Works great fast delevery
Thanks for great description of parts and ease of part number listings
Guest - May 21, 2020
Verified Purchase
★★★★★
★★★★★
Lawn mower bearing
Part installed easily & appears to be an improved bearing from original equipment.
Guest - July 5, 2020
Verified Purchase
★★★★★
★★★★★
Condition and fit
Part arrived quick and in good condition. Fit perfectly
Philip - July 15, 2020
Verified Purchase
★★★★★
★★★★★
Front bearings for 917 Craftsman mower
Great price, great quality and great service.
Guest - July 21, 2020
Verified Purchase
★★★★★
★★★★★
worked as expected
fit perfectly
Guest - August 19, 2020
Verified Purchase
★★★★★
★★★★★
What I needed
One part of my order was backordered, they would ship what they had, but I might have to pay extra shipping for the late part. I chose to wait.they keep me updated on the status of the back ordered part.. and shipped all parts. Would do it again, since they have the parts for my old mower (14 yrs or so)
Steven - February 5, 2022
Verified Purchase
★★★★★
★★★★★
Was the right part
Part was what expected and won’t know how good until it gets used for awhile. Person on the phone was very helpful and nice to talk to.
Guest - August 11, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Remove the outer wheel nut holding wheel on.
2. Remove E-clip on gear and axle pin, tap out axle pin gently.
3. Use 13mm wrench to remove the 2 screws holding wheel assembly on axle.
4. Remove bearing, mine was broken so snap ring was already floating on the axle.
5. Re-assemble wheel assembly with new bearing,
... Read more attach to mower with 2 13mm screws
and put axle pin in and gear on, re-attach E-Clip.
6. That\'s it, it\'s not hard, takes about an hour, but could be done in 30 minutes if you move quickly.
1. Removed old wheels, gears, bearings, cutting blade, and belt.
2. Needed repair shop to reassemble bearings as I could not get the spring rings off.
3. Replaced old parts with new. Used hammer and screwdriver to tap E-clips into place as my spring ring tool broke.
4. Replaced belt according to instructions provided.
<
... Read morebr />5. Replaced sharpened blade.
*** As always, be sure to disconnect spark plug before any repairs.***
Read less
Did you find this story helpful?
Thank you for voting!
Axle bearing broke stripped drive wheel
PETER from BETHEL, Connecticut
3 of 3 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Pulled wheel and adjusting bracket installed new bearing and wheel did both front wheels as cheap enough and if one goes bad the other can\'t be far behind. Parts came quick and were perfect fit. Snap ring pliers are a must!
1. Removed wheel
2. Removed height adjustment mechanism and disassembled
3. Had to hammer off frozen bearing.
4. Polished shaft, installed new bearing with grease
5. Reassembled height adjustment mechanism (with new dust cover) and reinstalled
6. Reinstalled wheel.
1. Determined the problem.
2. Ordered the correct replacement parts. Your process for ordering make it a breeze.
3. Removed wheels.
4. Removed adjuster assemblies. Disassembled as necessary.
5. Removed bearings. Replaced. Reassembled.
6. Piece of cake!!!
Did you find this story helpful?
Thank you for voting!
Drive wheel bearing broke. Replaced the drive belt.
Remove wheel bolt and wheel
E-ring can be removed with flathead screwdriver
Remove drive gear-may need persuasion
Axle pin has a collar- must be removed one direction only
Remove plastic shield
Remove snap ring retaining wheel bearing (inside mower deck)
Remove wheel bearing
(The wheel bearing d
... Read moreid not include the rubber o-ring from factory
reuse o-ring)
I removed the entire wheel adjustment assembly to install new bearing- remove 2 bolts inside the mower deck (be careful when removing these 11mm grass-seized bolts)
(Be careful not to damage tensioning spring for the axle gear box)
Spin the wheel height adjustment arm out of the way to reinstall the snap ring -(its a tight fit, I used channel lock pliers to compress things and expose snap ring\'s groove and then crammed the ring into place)
reassemble (ensure drive gears engage with plastic gear teeth on the wheels)
A mechanic friend of mine removed all of the damaged parts. Then he started by inserting the pawl drive in the drive shaft. He then placed the adjuster bearing on the shaft ,then the pinion and place the the e-ring on the end of the shaft. Lined up the gear on the wheel and the pinion, then tightened the hex nut on the to axle.
... Read more />
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16375009
Manufacturer Part Number: 587070202
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(2008-01)_WW_2.gif "Part Location Diagram of 587070202 Husqvarna Wheel Adjuster Bearing")
_(2008-01)_WW_2.gif "Part Location Diagram of 587070202 Husqvarna Wheel Adjuster Bearing")
