Genuine Black and Decker replacement part, this item is sold individually. The 624374-00 Push Ring is used on the lawn mowers listed below to hold the wheels onto the axle. One way to install this part is to use a socket just a little large than the axle, and tap it on with a hammer.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
WRONG PART
I ordered the wrong part and am returning them. The push rings were too big for my application. My fault for ordering the wrong size. I really like doing business with your company. It is amazing the parts that you have available for repairing worn out things. Keep up the great inventory and service.
Clint
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
Perfect fit!
This push ring along with the wheel (ordered at the same time from same website) turned my disabled mower back into action.
Guest - July 3, 2019
Verified Purchase
★★★★★
★★★★★
easy to find
Easy to find my part and I appreciated the follow up. Thanks!
Will - August 13, 2019
Verified Purchase
★★★★★
★★★★★
Replacement part for mower
Item was shipped fast and exactly what I needed..life tip..if you buy these buy at least 4 or more..you need 2 per tire on the black and decker 36v mower front tires
Guest - September 21, 2019
Verified Purchase
★★★★★
★★★★★
Aloha
very easy to order and track.
Loretta - March 11, 2020
Verified Purchase
★★★★★
★★★★★
Worked out perfect
Lawn mower push ring for wheel
Guest - June 22, 2020
Verified Purchase
★★★★★
★★★★★
Wheel Push Ring
Fast shipping and part worked great. Easy to put on and lawn cart wheels works great again.
Guest - December 19, 2020
Verified Purchase
★★★★★
★★★★★
Washer for wheel axle
It was easy to order got it very quick very easy to install will order again from you
James - November 4, 2021
Verified Purchase
★★★★★
★★★★★
Lawn Mower Wheel Push Ring
I don’t know if I’m just lucky, or if you have every part that is impossible to find. But I took a risk and you came through. I spent less than $20.00 to fix my lawnmower this year, the part fit perfectly, came quickly and was very affordable. I just need to thank you so very very much. From: Jami
Guest - September 6, 2023
Verified Purchase
★★★★★
★★★★★
Part worked great but...
Instructions or tips to remove old push ring would be helpful. I used a Dremel tool to cut into the ring in order to pop the ring off. Also to put the new ring on I used a socket from my ratchet set, put the small extension into the back of the socket and used a hammer to tap the push ring onto the axel.
Guest - May 18, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Used an adjustable wrench and a hammer to pound the new ring onto the mower. Now the ring and wheel stays on and easier to mow lawn with 4 wheels and not 3 wheels.
Used hand tools, standard procedure, easy parts replacement.
Push rings needed to be pressed onto shafts carefully - used a wrench socket as a push tool.
1. Turn mower on its left side.
2. Use a regular screwdriver to pry off the front right hubcap.
3. Use the screwdriver to gradually pry off the front right push ring.
4. Remove and discard the front right wheel. Leave the washer in place.
5. Apply grease to the bearing surface of one 7\" wheel.
6. Apply grea
... Read morese to the outer surface of the wheel in the area that will be under the push ring.
7. Slide the wheel onto the front right axle.
8. Place a new push ring over the end of the axle.
9. Position a large socket over the push ring. Hammer on the free end of the socket, so that the push ring slides down the axle and holds the wheel tightly enough that it doesn\'t wobble, but loosely enough that the wheel spins freely.
10. Push a new hubcap into place on the wheel.
11. Repeat steps 2 though 10 to remove the right rear wheel and replace it with an 8\" wheel.
12. Turn the mower onto its right side.
13. Repeat steps 2 through 11 to remove and replace the left front (7\") and rear (8\") wheels.
I looked at the other wheels, I figured out the order of the parts and then placed the Ring (clamp/claw) over the axle and when I tried to push it on manually, it would not go on so I improvised by getting a metal pipe who\'s opening fit perfectly over the axle & Ring and hammered it on. I then finished it by putting on the hub cap.
1. Removed wheel push ring
2. Removed wheel
3. Tore off flap trying to remove leftover flap.
4. Added WD-40 to remove remainder of flap with pliers after pushing down plastic tab.
5. Replaced with new flap.
6. Replaced wheels
7. Replaced, broken push rings.
8. Push rings not flexible enough to be
... Read more replaced, forced on with hammer, pliers, socket set, etc.
9. Swore to get a new mower next time something breaks.
Used screwdriver to pop of hub and pry off the push ring.
Slid off the broken wheel.
Put the new wheel on the axle.
Replaced the push ring and tapped in place with hammer.
Replaced the hub.
Struggled trying to remove the push ring. Decided to use the Dremel tool to cut into the ring and could then pop the ring off with a screwdriver.
Had some difficulty putting the new push ring on. My wife suggested trying a socket. I put a small extension rod into the back of the socket and tapped the end of the rod with a hammer
... Read moreto push the ring on the axel. Worked great!
Suggestions for the removal and installation of the push ring would be very helpful.
Since I had one broken wheel, I replaced all four wheels at the same time.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
