This genuine replacement part is supplied by original equipment manufacturer for use with Black and Decker walk-behind lawn mowers. This cap is secured to the wheel preventing dirt and debris from getting in between the wheel and the axle. It is made from durable, high quality plastic and it is sold individually.
Used an adjustable wrench and a hammer to pound the new ring onto the mower. Now the ring and wheel stays on and easier to mow lawn with 4 wheels and not 3 wheels.
Used hand tools, standard procedure, easy parts replacement.
Push rings needed to be pressed onto shafts carefully - used a wrench socket as a push tool.
1. Turn mower on its left side.
2. Use a regular screwdriver to pry off the front right hubcap.
3. Use the screwdriver to gradually pry off the front right push ring.
4. Remove and discard the front right wheel. Leave the washer in place.
5. Apply grease to the bearing surface of one 7\" wheel.
6. Apply grea
... Read morese to the outer surface of the wheel in the area that will be under the push ring.
7. Slide the wheel onto the front right axle.
8. Place a new push ring over the end of the axle.
9. Position a large socket over the push ring. Hammer on the free end of the socket, so that the push ring slides down the axle and holds the wheel tightly enough that it doesn\'t wobble, but loosely enough that the wheel spins freely.
10. Push a new hubcap into place on the wheel.
11. Repeat steps 2 though 10 to remove the right rear wheel and replace it with an 8\" wheel.
12. Turn the mower onto its right side.
13. Repeat steps 2 through 11 to remove and replace the left front (7\") and rear (8\") wheels.
I looked at the other wheels, I figured out the order of the parts and then placed the Ring (clamp/claw) over the axle and when I tried to push it on manually, it would not go on so I improvised by getting a metal pipe who\'s opening fit perfectly over the axle & Ring and hammered it on. I then finished it by putting on the hub cap.
I needed assistance from someone with a strong hand. Once he got involved, I thought we would likely get it on. He struggled with it at first, but after repeated attempts, the hub and cap were in place and the wheel was securely on. I am very grateful for eReplacements which helps you find the exact part for the model of lawnmower you
... Read morehave. I wasnGÇÖt sure it was going to happen otherwise.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9925920
Manufacturer Part Number: 239540-04
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/lawn-and-garden/lawn-mower/caps-and-lids/"},{"position":2,"name":"239540-04","title":"239540-04","url":""}]
