Trimmer Hoses and Tubes

Popular Trimmer Hoses and Tubes Parts

Manufacturer Part Number:
530069216
This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
Manufacturer Part Number:
530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged, and it can become brittle as well. When the fuel line is badly clogged or cracked, fuel can leak out and it can make it difficult to start or run the engine. To replace the fuel line, carefully disc...
Manufacturer Part Number:
13201056330
The purpose of the 13201056330 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the Fuel Return Line will become brittle and crack and will need to be replaced.
Manufacturer Part Number:
530069599
This is a genuine OEM replacement part designed for use with gas trimmers/blowers. The fuel line is what delivers the fuel from the fuel tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line. Over time these lines will become brittle and may...
Manufacturer Part Number:
V471001191
The V471001190 Fuel Pipe is connected to the fuel filter inside the fuel tank. It is inserted through the fuel line grommet and then connected to the carburetor so that when the primmer is pushed, it will force fuel into the carburetor. Fuel lines will at some time become brittle and crack and will have to be replaced.
Manufacturer Part Number:
530023877
This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality hardware is made of durable plastic and is sold individually. Plea...
Manufacturer Part Number:
537042401
Genuine Husqvarna replacement part, this item is sold individually. This hose is connected to the air purge bulb. The fuel from the is forced thru this tube and in to the carburetor>br> It can also be use as the return fuel line.
Manufacturer Part Number:
791-683974B
This is a genuine OEM approved replacement part, it is specially designed for use with Craftsman gas powered lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the material may begin to deterio...
Manufacturer Part Number:
791-682039
The 791-682039 Fuel Filter and Line, filters the fuel in the tank as it is forced into the carburetor up by means of the primer bulb. To install. Remove retainer ring from fuel line. Insert fuel line thru gas cap opening. Thread fuel line thru hole in bottom of the fuel tank. Pull fuel line thru to firmly seat against inside tank wall. Put retainer ring on fuel line,hold line and press ring firml...
Manufacturer Part Number:
581756205
This is a genuine manufacturer sourced replacement part designed for use with Husqvarna chainsaws, brushcutters and hedge trimmers. This is the hose that delivers fuel from the tank to the engine. It is made out of rubber and it is sold individually. Please note fuel filter is sold separately.

Trimmer Hose or Tube Brands