Echo Trimmer Hoses and Tubes

The purpose of the 13201056330 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the Fuel Return Line will become brittle and crack and will need to be replaced.

The V471001190 Fuel Pipe is connected to the fuel filter inside the fuel tank. It is inserted through the fuel line grommet and then connected to the carburetor so that when the primmer is pushed, it will force fuel into the carburetor. Fuel lines will at some time become brittle and crack and will have to be replaced.

This main pipe is a genuine replacement part that is sourced from original manufacturer for use with Echo trimmers. This durable metal pipe holds the flexible drive shaft and attaches to the gear box at the lower end of the pipe. Please note the main pipe includes the drive shaft liner, but the flexible drive shaft is sold separately.

OEM replacement part, this item is sold individually. This tube is connected to the fuel line grommet. Depending on the model you have it is either on the outside of the fuel tank or the inside of the fuel tank It is attached to the fuel filter inside the tank. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is used on the model numbers shown below.

This is a genuine manufacturer approved replacement part specially designed for Echo trimmers/brush cutters. Its purpose is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the fuel line will become brittle and crack and will need to be replaced. This pipe is made out of rubber material and it is sold individually.

This main pipe assembly directs flow efficiently within the system. Its durable construction supports dependable performance and secure connections.

This part is the fuel return tube for your outdoor power equipment. It is made of yellow plastic and measures 3x6x110mm. The return tube transports excess fuel back into the fuel tank after the primer bulb has been pressed and has primed the carburetor so the engine can start. Over time, this fuel tube can crack or clog, and this can cause problems for the engine. To replace this part, carefully p...

This is a genuine Echo replacement part. The main pipe assembly is designed by the manufacturer for use in curved shaft trimmers. This part is used to connect the engine with the trimmer head. You may require a screwdriver when replacing this item. This part is sold individually. This part does not include the cable.

This is a genuine OEM sourced part from the Echo manufacturer. The fuel tube (3x5x195mm) is composed of flexible plastic, and is compatible with many trimmer tools. The tube is fitted into the fuel grommet of the fuel tank assembly. This part is sold individually. A screwdriver is needed in the making the repair.

This is an authentic OEM part. The poly, Echo pipe-return-3x6x85mm is compatible with many various lawn and garden tools. This part is often fitted onto the grommet on the fuel tank. It is recommended to refer to specific manuals and diagrams for repair instructions. This part is sold individually. A screwdriver is helpful in the repair.

This replacement fuel pipe is a genuine OEM item, it is specially produced for use with Echo and Little Wonder gas powered equipment. This is only the return pipe, note that the supply pipe is sold separately. By pressing the primer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. Over time the material may ...

This main pipe assembly is designed for attachment-capable trimmers and powerheads to house the drive shaft and transfer power from the engine to the connected attachment. Built for durability and proper alignment, it supports smooth power delivery and reliable operation during use. It’s a practical replacement option for restoring structural integrity and consistent performance when the original ...

This genuine OEM component is specially designed for Echo and Shindaiwa lawn and garden equipment. It is an identical replacement for a missing or a damaged part that connects the fuel tube. Make sure to refer to the appropriate diagrams for your specific model for the exact location and the correct application of this item. Keep in mind this high-quality product is made of durable plastic and is ...

This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with trimmers. The hard plastic spool fits into the cutting head housing and is used to store the trimmer line. This item is available as an individual replacement part.

This is a genuine OEM sourced part which is designed for use with Echo handheld lawn and garden equipment. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line. Over time these lines will become brittle and may crack, and will have to be replaced. This high-quality ...

This authentic fuel pipe is a genuine replacement part manufactured for use with Echo outdoor power equipment. It is commonly used in conjunction with the fuel tank vent to allow air into the tank, enabling proper fuel flow to the engine. Over time, fuel pipes can crack or break—especially when the equipment is tilted—leading to potential fuel leaks. This replacement pipe is sold individually. Ple...

This genuine OEM component is specially designed for Echo and Shindaiwa lawn and garden equipment. It is an identical replacement for a missing or a damaged part that connects the fuel tube. Make sure to refer to the appropriate diagrams for your specific model for the exact location and the correct application of this item. Keep in mind this high-quality product is made of durable plastic and is ...

This Genuine OEM fuel line is designed for use with a variety of Echo gas-powered trimmers and hedge clippers. Made from durable plastic and sold individually, this essential component delivers fuel from the tank to the carburetor, enabling proper engine function. When the primer bulb is pressed, it fills the carburetor with fuel; once full, any excess fuel is returned to the tank via the fuel ret...

This item has been sourced from the original manufacturer and is intended to be used with trimmers, blowers, and edgers from Echo. The plastic fuel pipe fits into the fuel tank grommet and is used to allow fuel to return to the tank from the carburetor. The fuel pipe is sold as an individual replacement part.