( Grid squares measure 1x1 inch )

Fuel Line V471001211

Manufactured by:
Echo
ERP Number:
ERP16535462
Part Number:
V471001211
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(10 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

OEM replacement part, this item is sold individually. This tube is connected to the fuel line grommet. Depending on the model you have it is either on the outside of the fuel tank or the inside of the fuel tank It is attached to the fuel filter inside the tank. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is used on the model numbers shown below.

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
  • Brush Cutter
  • Edger
Part# V471001211 replaces these:
V471001211,

Videos For installing this part.

?
Replacing your Fuel Line
Replacing your Fuel Line

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
  • 5 stars
    6
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(10 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Would not start easy and would not stay running.

Joseph from Sand Springs, Oklahoma

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Removed carburetor cleaned , disassembled , replaced parts, and reassembled. will start and run after reassembly.
Did you find this story helpful?
Thank you for voting!

Idled ok but no power.

Arden from Seabrook, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Removed and replaced all tubes, grommets, filters, etc., and primer bulb. Grommet was leaking for sure, bulb seems to also have had a small leak.
Did you find this story helpful?
Thank you for voting!

Had a fuel leak, plus deteriorating lines

Felipe from Indio , California

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
I watched your YouTube tutorials. They were very helpful and easy to follow, thanks!
Did you find this story helpful?
Thank you for voting!

Fuel lines had developed a leak

Gurry from Dagsboro, Delaware

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Removed the fuel tank, flushed and replaced fuel filter, fuel return and vent line.
Did you find this story helpful?
Thank you for voting!

Rotted parts do to age.

Wayne from Port Charlotte, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Removed air cleaner.
Removed old plug and lines.
Reinstall new parts.
Did you find this story helpful?
Thank you for voting!

Fuel line somehow broke and could not draw fuel. It appears there may have been an issue with the factory installed system

Jim from Harwich, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Took the fuel tank off, dumped out the broken part, released the line from the tank using the grommet and installed the new equipment.
Did you find this story helpful?
Thank you for voting!

Leaking fuel / maintenance

Reid from Virginia Beach, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Removed old fuel lines,, replaced the same way they came off. Grommet was the only part that was a little difficult to get in the tank, put some grease on it and get one side started and roll it in with a screw driver tip.
Did you find this story helpful?
Thank you for voting!

Fuel leak and hard to start

Daniel from Lutz, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Cleaned carburetor and grommet area
Removed old parts
Installed new parts
Refilled fuel
Started trimmer
Did you find this story helpful?
Thank you for voting!

Fuel leak - Fuel line grommet needed replacing

James from Fairfield, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Removed the fuel and fuel tank
Replaced the existing fuel line
Replaced the fuel filter
Replaced the tank vent
Ran the fuel lines through the holes in the fuel line grommet
Reinstalled the fuel tank
Reinstalled the fuel like grommet with lines into the tank
Did you find this story helpful?
Thank you for voting!

Grommet where 3 fuel lines go through was leaking while running.

mike from lafayette, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Remove the all old parts and replaced them with the new. The beauty of the repairs was that all the replacement parts were exact OEM duplicates and everything fit just like it was supposed to.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16535462
Manufacturer Part Number: V471001211
Brand Model Number Description
Shindaiwa FH235 Hedge Trimmer - Hedge Trimmers (Fh)
Echo GT-225 Trimmer - String Trimmer
Echo GT-225I Trimmer - String Trimmer
Echo GT-225L Trimmer - String Trimmer
Echo GT-225SF Trimmer - String Trimmer
Shindaiwa LE235 Edger - Edgers
Shindaiwa M235 Multi-Tool - Multi-Tool System
Echo PAS-225 Trimmer - Pas Series Powerhead
Echo PE-225 Edger - Edger
Echo PPF-225 Pole Saw - Pole Saw
Echo SHC-225 Hedge Trimmer - Shaft Hedge Clipper
Echo SHC-225S Hedge Trimmer - Shaft Hedge Clipper
Echo SRM-225 Trimmer - Trimmer
Echo SRM-225I Trimmer - String Trimmer
Echo SRM-225U Brush Cutter - Brush Cutter
Echo SRM-2320T Trimmer - Straight Shaft Trimmer Brushcutter (Srm)
Shindaiwa T235 Trimmer - Grass Trimmers (T)