Craftsman Trimmer Carburetors

A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the Venturi is a butterfly valve called the throttle valve ' a rotating disc that can be turned end-on to the airflow, so as to h...

This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on

This carburetor mixes air and fuel to power small engines, helping ensure smooth starting and reliable performance. Built from durable materials, it supports consistent fuel delivery and efficient operation. Replacing a worn or faulty carburetor can resolve issues such as hard starting, rough idling, or poor acceleration, restoring proper engine function.

This is a genuine manufacturer-sourced replacement gasket repair kit that is specially made for use with Paramount and Poulan lawn and garden equipment. It is utilized to replace carburetor gaskets and diaphragms that were originally installed on a new unit. If you have a problem with your carburetor this will usually take care of it. Keep in mind this high-quality kit is sold individually. Please...

This is an OEM Poulan Carburetor Intake Boot used on gas trimmers to connect carburetor to a carburetor-adapter. This part is made out of Rubber. Over time rubber material can dry out and crack. If this part is warped, cracked or damaged it needs to be replaced for the unit to operate properly.

A carburetor is an important component which combines fuel and air before the combustible mixture is sent into the cylinder. Over time parts may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality carburetor is sold as an individual item. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. It is a genuine OEM carburetor wh...

This is a genuine OEM replacement part, it is sold individually. It is used on specific Gas Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts ...

This is an original replacement part sourced directly from the manufacturer. The carburetor is found in Craftsman trimmers. This part is a complete carburetor assembly made primarily of metal, and is used to mix fuel and air together for ignition in the engine. You will require a screwdriver when replacing this item. The carburetor is sold as an individual replacement part.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The carburetor mixes air and gas before the fuel mix goes to the engine. This part comes with the carburetor assembly, as well as the carburetor gasket. Let the engine cool and drain the gas tank before starting this repair. You may need screw drivers and pliers to aid you in this repair.

This is an authentic Husqvarna replacement part manufactured for use with trimmers and brush cutters. The carburetor adapter is used to connect the carburetor to the cylinder. The carburetor adapter is available as an individual replacement part, please note the gaskets are available separately.

This part is available as an individual replacement part. The carburetor adapter attaches to the gasket. During replacement, it may require an allen wrench to help install this part correctly. It is made of plastic and will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with Poulan and Weed Eater trimmers.

This is a genuine OEM sourced rebuild kit is designed for gas trimmers/blowers. This kit contains all the necessary parts to rebuild your carburetor. It includes: primer bulb, the float, needle, gaskets, seals needed to repair or refurbish a carburetor. Replacing these items you would need a screwdriver and pliers.

This replacement carburetor is an authentic OEM sourced replacement part. It is designed for use with gas trimmers. Carburetor mixes air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and...

This is an original Husqvarna replacement part manufactured for use with trimmers and brushcutters. The plastic choke lever is used to actuate the choke valve to limit air entering the engine when cold starting the machine. This choke lever is available as an individual replacement part, please see model diagram for associative parts.

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.

This genuine OEM sourced replacement carburetor is specially designed for use with Craftsman handheld trimmers. The purpose of this part is to mix the air and the gas before the combustible mix goes to the engine. If the engine won't start and the tank is full of fresh fuel or if the engine starts and then quickly dies, the carburetor is likely the problem. This high-quality component has a durabl...

This carburetor repair kit is supplied by the original manufacturer for use in trimmers. The kit includes the diaphragm and carburetor gaskets, strainers, primer bulb, inlet needles, springs, and pins. It is normal for gaskets to wear down, brittle, or lose their sealing ability over time due to exposure to fuel, heat, and pressure. Faulty gaskets can result in loss of compression, inadequate lubr...

This is an authentic OEM sourced component which is specially made for use with gas-powered lawn and garden equipment. The part provides an identical replacement for a missing or a worn diaphragm that was installed on a new unit. It is provides a tight seal for the fuel pump. Please make sure to refer to the appropriate diagrams of your model for the correct repair procedure. Keep in mind this hig...

This replacement carburetor is sourced from original equipment manufacturer for use with Weed Eater gas trimmers/edgers. The purpose of a carburetor is to supply a combustible mixture of fuel and air to the engine. It has a metal body and a rubber primer bulb. Please note gaskets are sold separately. To complete this repair you would need a hex key/allen wrench. • Remove air box cover and base...