Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
16352852-1-M-Husqvarna-530071811-Carburetor
Part Location Diagram of 530071811 Husqvarna Carburetor
See part B-17 in the diagram
( Grid squares measure 1x1 inch )
16352852-1-S-Husqvarna-530071811-Carburetor Part Location Diagram of 530071811 Husqvarna Carburetor

Carburetor 530071811

Manufactured by:
Husqvarna
ERP Number:
ERP16352852
Part Number:
530071811
Original Equipment Manufacturer ?
$60.96
★★★★★
★★★★★
8 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(26 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a genuine OEM replacement part, it is sold individually. It is used on specific Gas Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Poulan
  • Craftsman
  • Husqvarna
This part works with the following products:
  • Trimmer
  • Pole Saw
Part# 530071811 replaces these:
530071811,
★

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(8 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to install fixed the problem
Up and running in no time
John - August 4, 2019
Verified Purchase
★★★★★
★★★★★
Very easy repair. Two screws to attached to weedeater. Started 4th pull.
The part was just what I needed and I received it in the time frame you stated.
Guest - July 25, 2019
Verified Purchase
★★★★★
★★★★★
Received part that I ordered and it solved my problem.
Guest - June 3, 2020
Verified Purchase
★★★★★
★★★★★
Part came as advertised. In 2 minutes I had it installed. My equipment was working again.
The part fit like new. Quality part.
Guest - June 3, 2020
Verified Purchase
★★★★★
★★★★★
No problems. Instructions were great. Works as advertised.
Pole saw works great again. Thanks.
Guest - July 7, 2020
Verified Purchase
★★★★★
★★★★★
easy replacement
Carburetor was as advertised, was an easy replacement,and was delivered quickly, I will use eReplacementParts again good company
Guest - November 4, 2021
Verified Purchase
★★★★★
★★★★★
Works great!.
Just what I needed to get my chainsaw running, Thanks
Ronald - January 14, 2022
Verified Purchase
★★★★★
★★★★★
Replace carburetor
The part arrived on schedule and was installed right away, my weed eater working again like it was brand new=ƒÿÇ
Steve - July 11, 2021
Verified Purchase

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
What primer bulb do I need for replacement for my pole saw pp258tpc
Geoff For model number PP258TPC - September 12, 2022

Hello Geoff, Thank you for the question. The Bulb for this model is only sold as part of the Carburetor Assembly Part Number: 530071811. The Bulb is not sold separate. Thank you for your inquiry, good luck with this repair!

eReplacementParts Team
September 12, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(26 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Engine would not stay running

Joseph from Summerville , South Carolina

19 of 19 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
530071811
Repair instructions we\'re not needed simple. Remove the air filter assembly, then remove two screws, remove the gas lines and throttle cable the cable from the old carburetor. Remove old carburetor and install the new one. Assemble in reverse order.
Did you find this story helpful?
Thank you for voting!

Would not run with choke in off position.

Joseph from Halls, Tennessee

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
530030179, 530071811, 530071750, 530036575
These are the steps i used... Remove fuel lines from carburetor note position of each. Open up cover of air box. Remove air filter. Remove two screws with Allen wrench. Remove air box. Slighty remove carburetor and unhook throttle cable linkage noting the way it hooks up. Remove carburetor. Make sure old gasket doesn\'t stick to carburet or adapter. Remove two screws and remove carburetor adapter. Take carburetor adapter, air box, and air box cover and clean with toothbrush and dishwash liquid. Dry thoroughly. Take a q-tip dip in cleaner and clean around cylinder where adapter fits. Push screws through carburetor adapter and put new gasket on screws pushing it on adapter so it lines up perfectly. Tighten adapter on cylinder. Push screws through air box, new carburetor, and place new gasket on screws against carburetor so gasket lines up perfectly. Install throttle linkage cable to carburetor. Tighten screws back down. Clean air filter, or replace then install air box cover. Hook fuel lines back up in proper position. Always, ALWAYS use non-ethanol gas in your weed eater with proper oil mixture. My Poulan weed eater is 13 years old and this is the first time I habe replaced anything on it.
Read less
Did you find this story helpful?
Thank you for voting!

Current carburetor had a broken part.

William from The Villages, Florida

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
530071811, 530095646, 530069247, 530069216
Basically, remove the carburetor assembly, existing fuel lines and fuel filter. Screw the new carburetor (bolts) onto its mount. Measure the length of the existing fuel lines and cut the new ones to that length(s). Cut the ends of the new fuel lines at a 45 degree angle so they can be twisted into the fuel tank without damage. After inse rting the lines, hook them back out of the fuel tank with a piece of curved wire, re-cut them straight across and twist on the new fuel filter. After inserting the lines back into the fuel tank, and connecting them to the carburetor, add fuel, pump up the carburetor and pull start the engine. After it warms up, adjust the carburetor idle speed screw and it\'s all done. It works like new.
Read less
Did you find this story helpful?
Thank you for voting!

Trimmer not running at high speed

Neil from Granbury, Texas

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
901552001, 530071811
You start by removing the air cleaner assembly. Remove the fuel lines from the old carburetor and mark where they go. Remove the throttle assembly. Then remove the two screws securing the carburetor and gasket. Remove the old carburetor and gasket.. The install the new gasket and carburetor, and tighten down the screws. Replace the fuel l ines and throttle. Then put the air cleaner assembly back on the unit. And your done.
Read less
Did you find this story helpful?
Thank you for voting!

Weed Wacker was hard to start and wouldn\'t stay running.

Thomas from Aurora, Indiana

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
530071811, 530057547
1. Disconnected fuel lines and throttle linkage
2. Removed 2 bolts from carb and removed carb.
3. Removed 2 bolts from carb plate and removed carb plate.
4. Installed new parts, fit perfectly!
Did you find this story helpful?
Thank you for voting!

My trimmer would not start

William from Leesburtg, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
530071811
I tested the carb with starter spray by spraying some into the carb, and it started briefly so I knew the carb was not sending air and fuel to the cylinder. Rather that rebuilding the carb it was easier just to replace it.
Did you find this story helpful?
Thank you for voting!

Carburetor wouldnÆt prime

Mark from Victor, West Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
530071811, 530071750
Removed the two gas lines from the carburetor removed the two screws holding it in place under the air cleaner unhook the throttle cable.
Used new gasket and carburetor from ereplacementparts in reverse order. It was simple primed the carburetor pulled the starter three times back in business
Did you find this story helpful?
Thank you for voting!

carburetor was old - would not start each time I tried

William from Burnet, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
530071811
Removed fuel lines.
Used proper size allen wrench to remove carb.
Installed new carb, attached fuel lines.
Started on first pull.
Took less then 5 minuets to complete.
Did you find this story helpful?
Thank you for voting!

Bad carb and cracked carb adapter

Kris from Traverse city , Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
530071811, 530057547, 530071750
Removed air filter assembly
Removed carb bolts
Replaced carb adapter o-ring
Reinstalled in reverse order
Did you find this story helpful?
Thank you for voting!

Carb needed to be replaced and the fuel lines also needed replaced

Bob from boise, Idaho

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
530071811, 530036575, 530069247, 530069216
Poulan weed eater would not run carb was shot ordered the correct unit and fuel lines, removed old carb. That was about ten minutes, cleaned and wiped off intake installed new carb and replaced the fuel lines fifteen minutes, gased it up, pumped it up and it started and it ran great no adjustmentsGÇï was needed.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP16352852
Manufacturer Part Number: 530071811
Brand Model Number Description
Poulan 325 Edger - 325 - Poulan Pro Gas Trimmer - Pro Trimmers And Edgers
Craftsman 358.791032 Trimmer - 2-Cycle Gasoline Weedwacker
Craftsman 358791010 Trimmer - Weedwacker
Craftsman 358791030 Trimmer - Trimmer
Craftsman 358791031 Trimmer - Trimmer
Craftsman 358791032 Trimmer - Trimmer
Craftsman 358791050 Trimmer - Trimmer
Craftsman 358791051 Trimmer - Trimmer
Craftsman 358791530 Trimmer - Trimmer
Craftsman 358791540 Trimmer - Trimmer
Craftsman 358791560 Trimmer - Trimmer
Craftsman 358791590 Trimmer - Trimmer
Craftsman 358791820 Trimmer - Trimmer
Craftsman 358796600 Trimmer - Trimmer
Craftsman 944514460 Trimmer - Trimmer
Craftsman 944515560 Trimmer - Trimmer
Craftsman 944516360 Trimmer - Trimmer
Craftsman 944516550 Trimmer - Trimmer
Craftsman 944516560 Trimmer - Trimmer
Craftsman 944516561 Trimmer - Trimmer
Poulan MC025 Trimmer - Poulan String Trimmer Model MC025 Parts
Poulan MC125 Trimmer - Poulan String Trimmer Model MC125 Parts
Poulan P4500 Trimmer - Gas Trimmer
Husqvarna P4500F Trimmer - Handheld Trimmer
Poulan PP025 Trimmer - Pro Gas Trimmer
Poulan PP125 Trimmer - Pro Gas Trimmer
Poulan PP125E Trimmer - Trimmer
Poulan PP25 Trimmer - String Trimmer
Poulan PP258TP Pole Saw - Pole Pruner
Poulan PP258TPC Pole Saw - Power Pruner
Carburetor
$ 60.96
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖