Powermate Edger Parts
We sell only genuine OEM Powermate ® parts.
Top Powermate Edger Models
-
Powermate PWLE07991 79Cc 4-Cycle Lawn Edger Parts
-
Powermate PWLE0799 79Cc 4-Cycle Lawn Edger Parts
-
Powermate P-WLE-0799-F2N 4-Cycle Lawn Edger Parts
-
Powermate PEA438 43Cc Earth Auger Powerhead With 8 In. Bit Edger Parts
-
Powermate P-WLE-1639-E 4-Cycle Edger King Pro Parts
-
Powermate PEA4381 43Cc Earth Auger Powerhead With 8 In. Bit Edger Parts
-
Powermate P-WLE-1639 4-Cycle Edger King Pro Parts
Popular Powermate Edger Parts
- Manufacturer Part Number:
- A100998
This is a genuine replacement part manufactured for use with lawn edgers. The starter assembly is a complete recoil starter including the pulley, rope, handle, ratchets, guide pan, and springs. Components of the starter assembly can wear out from normal use or fall out of line with each other. It can save time by replacing the whole assembly rather than rebuilding it. This starter assembly is sold...
- Manufacturer Part Number:
- A100982
This is a Powermate, Southland, and Airstream replacement part directly sourced from the manufacturer for use in edgers. The air cleaner cover goes next to the air cleaner element. It might require a screwdriver and a socket set to replace this item. It will need to be replaced if it breaks. This part is made of a durable material and is available individually.
- Manufacturer Part Number:
- A101172
This is an authentic replacement part manufactured for use with lawn edgers and blowers. The special air cleaner element is used to prevent dirt and debris from entering the engine. Air cleaners wear out over time and replacing a worn air cleaner is part of normal maintenance. This air cleaner element is available as an individual replacement part.
- Manufacturer Part Number:
- A201185
- Manufacturer Part Number:
- A100503
This part has been sourced from the original manufacturer to be used with lawn edgers from Powermate and Southland. The metal blade can wear down over time and begin to shred the lawn. If the blade wears down it will need to be replaced to maintain clean edges around the lawn. This blade is available as an individual replacement part.
- Manufacturer Part Number:
- A201181
This is an OEM part sourced directly from the manufacturer. The earth blade is designed for use in Southland earth augers. This part is made of metal, and is placed on the end of the auger assembly to begin the cut. You will require a wrench when replacing this part. This item is sold individually.
- Manufacturer Part Number:
- A100987
It is a genuine manufacturer-supplied item that is made for use with Powermate, Southland and Airstream lawn edgers. This item provides an identical replacement for a damaged or a missing drive shaft assembly that was installed on a new unit. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure. Note, this high-quality assembly is made of durable metal an...
- Manufacturer Part Number:
- A100627
This genuine manufacturer-approved replacement part, it is specially designed for use with lawn edgers. The purpose of this gasket is to create an air-tight seal for the air cleaner. Over time gaskets tend to get compressed and crack eventually requiring replacement to maintain a proper seal. It is made of high-quality composite material and it is sold individually.
- Manufacturer Part Number:
- A100500
This drive shaft transfers rotational force between components. Designed for strength and balance, it helps maintain smooth and efficient operation.
- Manufacturer Part Number:
- 089210136012
This is a genuine replacement part sourced from the original manufacturer for use with edgers, sanders, and miter saws. The special ball bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This ball bearing is available as an individual replacement please see model diagram for associative parts.
- Manufacturer Part Number:
- A100629
The sustain board attaches to the air cleaner element. This is a genuine replacement part sourced from the original manufacturer for use with edgers made by Powermate, Homelite, Southland, and Airstream. It is made out of plastic and is sold individually. During replacement, it may require a screwdriver to help install this part correctly. It may become broken and will need to be replaced.
- Manufacturer Part Number:
- A100630
This OEM replacement part is supplied directly from the original parts manufacturer for use with various models of lawn edgers. The air cleaner housing secures the filter element and prevents any excess dust and debris from entering the engine. This part is made of a high-quality plastic and is sold separately.
Powermate Edger Models
-
Powermate PWLE07991 79Cc 4-Cycle Lawn Edger
-
Powermate PWLE0799 79Cc 4-Cycle Lawn Edger
-
Powermate P-WLE-0799-F2N 4-Cycle Lawn Edger
-
Powermate PEA438 43Cc Earth Auger Powerhead With 8 In. Bit Edger
-
Powermate P-WLE-1639-E 4-Cycle Edger King Pro
-
Powermate PEA4381 43Cc Earth Auger Powerhead With 8 In. Bit Edger
-
Powermate P-WLE-1639 4-Cycle Edger King Pro