Part Location Diagram of 49019-0029 Kawasaki FILTER-FUEL
See part G-49019 in the diagram

FILTER-FUEL 49019-0029

Manufactured by:
Kawasaki
ERP Number:
ERP18635252
Part Number:
49019-0029
Original Equipment Manufacturer ?
$15.30
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Kawasaki
Part# 49019-0029 replaces these:
49019-2111,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Maintenance; unit had not been serviced since the date of acquisition, which was nine years ago

Steven from Hawaii National Park, Hawaii

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Removed air filter cover and replace air filter and re-installed cover
Removed fuel tank.
Removed cylinder shroud.
Removed crankcase pulse tube.
Replace crankcase pulse tube.
Flip unit over to expose bottom of carburetor where primer bulb resides.
Removed the four screws on the carburetor unit, while th e carburetor was left on the cylinder.
Removed and replaced primer bulb; re-installed the four carburetor screws.
Removed fuel grommet and fuel lines from fuel tank by using a screwdriver and prying up.
Put Vaseline on fuel filter outlet pipe and inserted fuel line.
Cut opposite end of fuel line and carburetor return hose at an angle and rubbed Vaseline to facilitate the installation of tubes into fuel grommet.
Applied Vaseline to fuel grommet and inserted fuel into orifice of fuel tank by placing at an angle and rotating while pushing down.
Ensured fuel tubes line lengths exiting from the tank was at the proper length if not pulled or pushed as necessary.
Re-installed fuel tank and cylinder shroud using loctite.
Did you find this story helpful?
Thank you for voting!

Government Mandated Ethanol Ruined Fuel System

Rob from OTTSVILLE, Pennsylvania

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Removed affected fuel system parts, fuel lines, grommets, carburetor and replaced with new parts. Ethanol lowers fuel economy and ruins fuel systems in everything, we all should demand an end to it\'s force use on us all.
Did you find this story helpful?
Thank you for voting!

My trimmer is about 25 years old, all the fuel lines were rotten

Dale from Sgt Bluff, Iowa

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
I removed all the old parts and replaced them
Did you find this story helpful?
Thank you for voting!

Primer bulb broken, and trouble starting/running

Michael from Jacksonville Beach, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
1. Removed fuel tank.
2. Replaced primer bulb.
3. Installed new fuel filter.
4. Reattached fuel tank.
Did you find this story helpful?
Thank you for voting!
  • 1