Part Location Diagram of 502206503 Husqvarna Screw
See part E-1 in the diagram
( Grid squares measure 1x1 inch )

Screw 502206503

Manufactured by:
Husqvarna
ERP Number:
ERP8985566
Part Number:
502206503
Original Equipment Manufacturer ?
  Works with your model  CS2135T!
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(10 rated repairs) ?
  Works with your model   CS2135T!

Product Description

?

This replacement screw is an authentic Husqvarna part. It is a genuine manufacturer approved part commonly used on a variety of power equipment including chainsaws, trimmers and sweepers. This standard hardware is utilized in many different placed depending on a tool. Please make sure to check appropriate diagrams to verify correct location and application for this screw. It has hex head that will require a wrench to install or remove it and it is sold individually.

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
This part works with the following products:
  • Hedge Trimmer
  • Trimmer
  • Brush Cutter
  • Edger
  • Pole Saw
  • Chainsaw
Part# 502206503 replaces these:
502206503,

Customer Part Reviews

?
3.7
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(10 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Replace worn and missing parts.

Cecil from Prattville, Alabama

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Piece of cake. Good as new again!
Did you find this story helpful?
Thank you for voting!

Trimmer air filter cover fell off and got lost

James from Washington, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
1. Removed old air filter
2. Installed new air filter
3. Installed new air filter cover with new thumb screw
Did you find this story helpful?
Thank you for voting!

Air filter parts came loose and fell off and could not find.

RON from DEEP GAP, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Simply installed the parts into the Husquvarna Trimmer. Parts were an exact replacement and everything went perfect. Order to parts delivery time was excellent. Thanks!
Did you find this story helpful?
Thank you for voting!

Replaced air filter cover

Johnny from Fort Worth , Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
502204001, 503888001, 502206503
Just replace the air filter cover.
Did you find this story helpful?
Thank you for voting!

Screw wasn\'t long enough to catch the incoming threads on the filter. Used without the knob.

James from FAIRFIELD, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
503888002, 502206503
Tried to replace the filter cover properly but the screw provided did not extend beyond the filter cover enough to catch the female threads on the filter so used without the tightening knob.
Did you find this story helpful?
Thank you for voting!

carburtetor was not pumping or metering fuel properly

Tom from Eatonville, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Removed external housing, then removed carburetor. Cleaned gasket surfaces, and installed new parts. Started engine and set carburetor low speed idle screw and set high speed screw for proper fuel mixture settings.
Did you find this story helpful?
Thank you for voting!

The lowercase housing was busted.

James from Easley, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
The job was not too hard, my son actually did it as an FFA project with my supervision it took about 45 minutes to complete. The entire engine housing had to be disassembled in order to replace the lower section. The hardest part was removing the support bearing and reinstalling it.
Did you find this story helpful?
Thank you for voting!

Knob and air filter cover were lost in the field

Mark from MOORESVILLE, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
I thought I was going to have to take a couple of things off. but I was able to shake the nut back into place and then simply replace the last parts.
Did you find this story helpful?
Thank you for voting!

Lost some parts

Frank from Chester, Connecticut

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
I replaced the parts that I lost for my air cleaner assembly
Did you find this story helpful?
Thank you for voting!

I lost the bolt and knob. Put them somewhere safe...

Mike from Dandridge, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
502204001, 502206503
Re installed the new knob and bolt
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8985566
Manufacturer Part Number: 502206503
Brand Model Number Description
Husqvarna 1062568-62 Trimmer - Husqvarna String Trimmer Model 1062568-62 (106256862, 1062568 62) Parts
Husqvarna 123C Trimmer - Husqvarna String Trimmer Model 123C/2004-01 (123C/200401, 123C/2004 01) Parts
Husqvarna 123L Trimmer - String Trimmer
Husqvarna 123LD Trimmer - Husqvarna String Trimmer Model 123LD/2004-01 (123LD/200401, 123LD/2004 01) Parts
Husqvarna 223L Hedge Trimmer - 18 In. Straight Gas Trimmer
Husqvarna 223R Brush Cutter - Brushcutter
Husqvarna 322C Trimmer - Line Trimmer
Husqvarna 322E Edger - Husqvarna Edger Model 322E/1999-10 (322E/199910, 322E/1999 10) Parts
Husqvarna 322L Trimmer - Line Trimmer
Husqvarna 322R Trimmer - Line Trimmer
Husqvarna 322T Trimmer - Trimmer
Husqvarna 323C Trimmer - Husqvarna String Trimmer Model 323C/2002-01 (323C/200201, 323C/2002 01) Parts
Husqvarna 323E Edger - Husqvarna Edger Model 323E Parts
Husqvarna 323EX Trimmer - Trimmer
Husqvarna 323HD60 Hedge Trimmer - Hedge Trimmer
Husqvarna 323HE3 Hedge Trimmer - Hedge Trimmer
Husqvarna 323L Hedge Trimmer - Lightweight Trimmer
Husqvarna 323LD Trimmer - Husqvarna String Trimmer Model 323LD/2002-01 (323LD/200201, 323LD/2002 01) Parts
Husqvarna 323P Pole Saw - 4 Saw Attachment
Husqvarna 323P4 Pole Saw - Pole Saw
Husqvarna 323R Brush Cutter - Brushcutter
Husqvarna 323RJ Brush Cutter - Brushcutter
Husqvarna 323RJX Brush Cutter - 323 Rjx (2005-05)
Husqvarna 325 Edger - Edger
Husqvarna 325C Trimmer - Husqvarna String Trimmer Model 325C Parts
Husqvarna 325CX Trimmer - Line Trimmer
Husqvarna 325E Trimmer - X-Series
Husqvarna 325EX Edger - Husqvarna Edger Model 325EX/1999-10 (325EX/199910, 325EX/1999 10) Parts
Husqvarna 325HA110 Hedge Trimmer - 325 Hedgetrimmer Attachment Ha110, Unpublished June 2015. Ue (20054000001-20040100000)
Husqvarna 325HA850 Hedge Trimmer - 325 Hedgetrimmer Attachment Ha850, Unpublished June 2015. Ue (20050600001-20054000000)