This is a genuine OEM sourced replacement part used on Husqvarna trimmers and brushcutters. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This is a metal body carburetor, it is sold individually. When replacing carburetor it is advised that you also replace gaskets to ensure proper air tight seal for optimum performance. You will need a screwdriver to perform this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Good Repair
The part was in excellent condition and arrived on schedule. Repair had more steps than expected but it was easy. Trimmer works great. I am glad to have purchased the original part.
Guest - June 4, 2019
Verified Purchase
★★★★★
★★★★★
Carburetor
Great parts, easy to repair my grass trimmer. great price and fast delivery.
Jack - April 29, 2020
Verified Purchase
★★★★★
★★★★★
Great part worked great
The part arrive in good condition. Operates great
Guest - August 22, 2021
Verified Purchase
★★★★★
★★★★★
OEM Part, and a fair price.
"AGAIN" part arrived quickly, and the repair was quick and easy. ( 11 year old string trimmer) Everything fit like it was supposed to, "because it was the exact same part" (not a universal part) right down to the OEM part number. A universal version of this product was available elsewhere, for about 8 dollars less, but you would have to adapt it to make it fit. I don't have time for that. This unit was bolt on, gas and go. Have been using it daily, straight out of the box for most of 2 weeks now, no problems. Note: I have previously bought other OEM parts from this company, which is why I looked them up again with this new issue. I will not hesitate to buy from them again for future needs. Also note that no compensation was offered, expected, or excepted for comments expressed here. CJ 8/2021
Guest - August 25, 2021
Verified Purchase
★★★★★
★★★★★
Worked like a charm
The carburetor was an exact replacement. I was on the verge of retiring my Husqvarna 322L line trimmer. Last year I had it serviced but never ran correctly. I installed the carburetor and only had to make a minor adjustment.
Guest - April 15, 2023
Verified Purchase
★★★★★
★★★★★
Replacement carb for husky
Parts were easy to order, delivered on time and were correct. I recommend this company.
Guest - June 23, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the complete air cleaner assembly, Remove the The fuel lines and throttle from the old carburetor. Remove the screws holding the filter holder and carburetor on. Remove the old carburetor and choke lever. Install the new carburetor and install the new one, Then install the filter cover and tighten the screws. Attach the fuel lines
... Read moreand throttle and place the choke lever on. Install the air cleaner assembly.
1. Took pictures before I took it apart.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and g
... Read moreasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
Remove the top engine cover and the two screws attaching the carb and place the new carb besides the old one. Remove the lines and put them on the on the new carb where they go so you don\'t get them mixed up. Now put the two screws back in the new carb, tighten securely and replace the engine cover and you\'re ready to trim your grass.
1. Remove the covers over the carburetor.
2. Remove the carb, pay attention how the fuel lines are connected and the cable.
3. Remove the gasket between the carb and motor and replace if needed.
4. Reinstall gas lines cable and carb to the motor.
5. Replace covers.
6. Start motor and adjust jets and idle scre
... Read morews.
If you still can\'t get the unit to run correctly, inspect the screen on the spark arrestor.
If clogged, clean it out, this may have been your problem all along.
Remove the air filter assembly, removed the fuel lines and throttle from the carburetor, remove the air filter base, remove the old carburetor. Install the new carburetor and air filter base, hook up the fuel lines and throttle. Remove the chock control from the old carburetor and place it on the new one. Attach the air cleaner assembly
Did you find this story helpful?
Thank you for voting!
High speed jet was stopped up from leaving gas in engine for three months without running trimmer.
1 - Removed cover from carb - 3 screws
2- Unscrewed carb - 3 screws
3 - Pulled carb from engine while unhooking throttle cable
4 - Unhooked the 2 gas lines
5 - Removed carb
Reverse order to re-install carb. Make sure to take off old gasket from engine when installing new carb and gasket. Suggest changing gas
... Read more bulb and carb filter at this time.
6 - Follow instructions supplied with new carb to adjust carb for proper operation.
This was not a hard job just pay attention when removing gas lines and throttle cable to make sure they go back in proper place and function correctly.
Drained all fuel.
Disassembled exterior housing (lots of small screws).
Removed fuel and vent lines using needlenose pliers
Replaced primer bulb (py attention to the direction of flow as it is supposed to pull fuel through the carb back to the tank.)
Removed old carb (two screws) paying attention to throttle link
... Read moreage
Installed new carb
Re-attached all fuel, vent lines
Re-filled fuel
Pulled rope and carb was adjusted perfectly out of the box!
Installed Hi/Lo lock caps
Trimmer
- Husqvarna String Trimmer Model 325LDX Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_13.gif "Part Location Diagram of 588171156 Husqvarna Carburetor")
_WW_13.gif "Part Location Diagram of 588171156 Husqvarna Carburetor")
