OEM Weber Ash Catcher Assembly for 22-1/2" One Touch Grills. Components included are: ash catcher bowl, ring, and handle. These parts are NOT sold separately. Ash Cather makes cleaning the ashes from your grill easier and a a lot less messy. If the ash catcher is bent or damaged it is recommended to replace it.
I installed the ash catcher in place of the ash tray as a safety improvement to my older grill, to better contain the ashes during grilling. I use the grill on my wooden deck and don\'t want hot ashes blowing out of the tray.
The leg positions on my older 22-1/2\" Weber grill were correct, but the orientation of the leg at
... Read moretachment flanges was not compatible with the ash catcher. No problem, I simply drilled through the leg flanges, legs, and tabs on the ash catcher and bolted the catcher skirt to the grill. This was an easy fix and I am very happy with the results. I used stainless steel bolt and nuts with lock washers and it works great.
Thank you to eReplacementParts.com for having the parts I needed to get the job done.
Read less
Did you find this story helpful?
Thank you for voting!
I wanted to upgrade the ash catcher of my Weber Kettle
I\'m classifying this as an upgrade rather than a repair as my Weber Kettle had the original ash pan BUT I wanted to replace that item with the enclosed ash catcher.
Glad I did as it could not have been easier.
The new assembly comes complete and it\'s a simple process to invert the grill, remove the legs and snap the new asse
... Read morembly into the slots already manufactured into the leg supports. Then just replace the legs and you\'re ready to use the grill.
I should have done this long ago. No more errant breezes blowing ash on my patio and it will be much simpler to dump the ash from the enclosed pan.
Not only is it more convenient but it\'s a better looking unit now.
Read less
Did you find this story helpful?
Thank you for voting!
I have a 10 year old Weber Performer grill that the ash catcher assembly simply fell apart
The ash catcher assembly simply snaps in place on the leg inserts at the bottom of the kettle. As you install be sure to pass the damper handle through the slot in the new ash catcher assembly. A simple fix. With new grills and the ash catcher the grill is like new!
It was just a simple replacement in kind. No real instructions are needed.
Did you find this story helpful?
Thank you for voting!
I bought the most inexpensive kettle grill sold at my local home store. then added parts to upgrade it. With help from your customer service, I now have a premium grill setup without the price tags
Just slid the legs out a little, installed the new basket housing slid the legs back onto the tabs on the basket housing lined everything back up and I\'m ready to go now.
Remove old tray and 3 spring clips from each leg.
Align and insert cleaning handle thru horizontal slot on upper catcher assembly.
Snap in place 3 clips on upper assembly to each leg base at exposed slots on bottom of kettle
Insert bowl catcher onto upper assembly
Done!
Did you find this story helpful?
Thank you for voting!
Replacing the ash catcher assembly on a circa 2002 1st generation one touch Weber performer
Each part came with a thorough instruction manual. Follow these manuals and repair should go easy.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
