Part Location Diagram of 62423 Weber Char-basket Assembly
See part 16 in the diagram
( Grid squares measure 1x1 inch )

Char-basket Assembly 62423

Manufactured by:
Weber
ERP Number:
ERP10510958
Part Number:
62423
Original Equipment Manufacturer ?
$41.27
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Weber assembly used with charcoal grills. This is one half of the two-part char basket, which sits on top of the Charcoal Grate (part # 7441) where the charcoal burns and below the Cooking Grate (part # 80629) where the food sits. The basket is used to hold charcoal, either inside or outside of it, in order to facilitate direct or indirect heating. For direct heating, place the charcoal inside of the basket halves in order to concentrate the heat. For indirect heating, place the charcoal around the outside of the baskets. This allows the heat to fill the grill while providing a gap for the food to heat on the grill indirectly.

Troubleshooting

This part works with the following brands:
  • Weber
This part works with the following products:
  • Grill

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The parts wore out due to age and being outside all the time

Thomas from Teumseh, Michigan

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
65143, 62423
It was just a simple replacement in kind. No real instructions are needed.
Did you find this story helpful?
Thank you for voting!

Replacing the ash catcher assembly on a circa 2002 1st generation one touch Weber performer

Jeff from St. Louis , Missouri

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
65143, 62423
Followed the manufacturers instructions and it was easy. Snapped the assembly ring on and mounted the ash catcher pan
Did you find this story helpful?
Thank you for voting!

The table had cracked in half, the burner assembly when out, and the char-baskets were cooked after 14 years of use.

Hope from Stockton, California

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
65189, 62423, 10469
1. Removed the old table with screw driver
2. Removed the burner assembly with pliers and screw driver
3. Replaced the burner assembly with the new one using pliers and screw driver
4. Replaced the table top using screw driver
5. Tested burner
6. Threw out old char-baskets
7. Placed two baskets inside.
Did you find this story helpful?
Thank you for voting!

The Charcoal baskets were rusted

Marguerite from DARIEN, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
62423
Bought replacements and they are so nice.
Did you find this story helpful?
Thank you for voting!
  • 1