Ignitor 80000653
- Manufactured by:
- Char-Broil
- ERP Number:
- ERP10292334
- Part Number:
- 80000653
Does this part fit my model?
Need help finding your model number?Product Description
?This is an authentic Char-Broil replacement part that has been sourced from the original manufacturer to be used with outdoor grills. The ignitor kit is used to create an electric arc at the burner tube which lights the fuel that is emitted by the burners. This kit includes the mounting bracket, ignitor switch, electrode, and the wire.
Frequently Purchased Together
?Troubleshooting
- Char-Broil
- Grill
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Burners were rusted out /as was the burner brace/also the ignitor was non functional
Michael from CinCinnati, Ohio
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
- Parts Used:
- G416-0015-W1, 80018594, 80012481, 80000653
2. Used screwdriver and adjustable to remove burner brace
3. Installed new burner brace and three new burners
4. Replaced grill grates
5. Removed screws on sides of front panel to access ignitor and wires
6. Remove large nut to push ignitor thru pane ... Read more l and disconnect wires
7. Installed new ignitor and wires
8. Tighten large plastic nut
9. Push panel back into place and replaced screws on side of panel
10. Ready to grill after installing grease pan
Ignitor was not working after 20 years of service !
Michael from Gardena, California
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
- Parts Used:
- 80000653
Grill ignitor stopped working
M.O\'Shea from Cullman, Alabama
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- 80000653
Replaced with new ignitor
No special instructions need a socket set and cross point screwdriver to remove original ignitor. Took less than 15 minutes to remove original and install new ignitor. Perfect fit no problems. Install AA battery
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.