This is an adjustable burner bracket designed for use with Char-Broil grills. It contains stainless carryover channels. Adjusts 23-1/2" to 25". Includes 2 bar extensions, 2 angled extensions for brackets ending at an angle, hardware and instructions. Fits burners up to 2-5/8" wide. You would need a screwdriver to complete this repair.
Troubleshooting
This part works with the following brands:
Char-Broil
This part works with the following products:
Grill
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(16 Reviews)
Click to filter by ratings:
5 stars
14
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Burner Brace, easy fix.
This is a common part that wears out with the significant amount of use our barbecue experiences throughout the year. It was the right part. It took me a few minutes to install and we were back in business!
Thank you
Guest - May 21, 2019
Verified Purchase
★★★★★
★★★★★
Quality parts, fast shipping
Parts arrived faster than predicted, packaged well, and the parts were of better quality than I expected. Metal was heavier and should last longer than the first time I replaced from a different vendor - repair was easy. I would order again from ereplacementparts.com. Now to fire up the grill!!!
Guest - June 20, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair.
Stainless exterior is still going strong and changing out the cast and high temp parts just requires a bit of patience. Great to still find them on eReplacements.
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
everything was fine, works well
on time , everything correct
Guest - July 11, 2019
Verified Purchase
★★★★★
★★★★★
great pcs.
it works great ty
Guest - July 29, 2019
Verified Purchase
★★★★★
★★★★★
Replacement part- fits well
Have an older model Char-Broil grill. The burner brace with carryover tubes needed was no longer available for that model. This replacement part came with flexible parts and directions for different attachment applications. It is well made/sturdy and arrived promptly.
Guest - August 6, 2019
Verified Purchase
★★★★★
★★★★★
perfect fit easy to install.
same as above.
Guest - September 9, 2019
Verified Purchase
★★★★★
★★★★★
part worked perfect for my grill thank you
the part worked perfect for my grill. thank you
Guest - April 18, 2020
Verified Purchase
★★★★★
★★★★★
Replacement part for gas grill
Part was shipped and received quickly. Part fit perfectly. Will do business with again.
Guest - June 30, 2020
Verified Purchase
★★★★★
★★★★★
Fast, easy and good quality
The part was easy to install and my very old grill now lights and works a lot like new (and the difference isn’t your fault!)
Guest - July 15, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed grill grates to access burners and burner brace.
2. Used screwdriver and adjustable to remove burner brace
3. Installed new burner brace and three new burners
4. Replaced grill grates
5. Removed screws on sides of front panel to access ignitor and wires
6. Remove large nut to push ignitor thru pane
... Read morel and disconnect wires
7. Installed new ignitor and wires
8. Tighten large plastic nut
9. Push panel back into place and replaced screws on side of panel
10. Ready to grill after installing grease pan
Read less
Did you find this story helpful?
Thank you for voting!
The burners had never been replaced after 5 years. The carryover tube was falling apart with rust and corrosion.
1. Removed the racks, then lifted the burners out of the grill.
2. Took wrench and screwdriver and removed the single bolt/nut off each end of grill.
3. Cleaned up the belly of the grill.
4. Assembled the new L bracket to each end of the new carryover tube (do not tighten).
5. Re-attach the new carryover tube
... Read moreto the grill, align to center, tighten bolts/nuts.
6. Slide new burners into place and adjust the bolt on each burner to regulate the air/gas.
Removed and replaced both items( once I was able to get them ordered). Both parts were obsolete but by calling the customer service number to get the replacement part,they arrived in just a few days.
Removed old burners and replaced with the new ones. Easy.
Removed and installed the burner brace by reading the included instructions.
Works as good as when it was new.
Simple repair nad a great time to get the grill clean for the summer of cooking.
Get the burners off by lifting up and to towards the back of the grill.
Get a grip on the nut below the right and left ends and a screwdriver on the to of the bolt.
Remove the old carryover tube and clean the mounting position for the new o
... Read morene to sit properly.
Reverse order to install new tube while making sure the open slots face FORWARD.
Fire up grill and enjoy the summer.
Read less
Did you find this story helpful?
Thank you for voting!
I moved the grill and realized that it needed an internal over-haul
First thing---DISCONNECT TANK
1. Removed the flame reducers
2. Removed the cast iron burners
3. Removed what was left of the old burner brace. Some of the carryover tubes had eroded away. The nut on one side was frozen on the bolt. I ended up grinding off the head.
Did you find this story helpful?
Thank you for voting!
Burner brace was burned through and needed replacement
Followed the very simple instructions with replacement part and removed old piece and put in new one. Very simple and easy
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
