Part Location Diagram of 17703-ZM5-003 Honda Tube- Fuel
See part J-11 in the diagram
( Grid squares measure 1x1 inch )

Tube- Fuel 17703-ZM5-003

Manufactured by:
Honda
ERP Number:
ERP9908841
Part Number:
17703-ZM5-003
Original Equipment Manufacturer ?
$8.42
Special Order

A Bit Difficult 

30 - 60 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is the pick tube that the fuel filter connects to. It is an identical replacement for a worn, damaged or a missing part that was installed on a new unit. This is a genuine OEM replacement tube-fuel which is designed for use with Honda engines which are commonly installed on a variety of lawn and garden equipment. It is made of high-quality rubber material and is sold individually. Check the diagrams for your model to ensure the correct repair procedure.

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Sitting for more than eight years, all hoses were cracked and fuel tank had bad gas in it. Would not start.

Mike from El Cajon, California

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1. Removed air cleaner assembly.
2. Removed throttle cable from carb.
3, Removed rope pull start and fuel tank.
4. Removed fuel lines from tank, making sure to mark where they go.
5. Removed fuel tank grommet and filter and replaced with new ones.
6. Removed carb and replaced with new one.
7. Install fu el tank, rope start, hook up fuel lines, attach throttle cable and air filter assy, fill with fuel, prime carb and start engine, done.
(Fuel tank grommet very hard to get out, you will need strong hands. When re-installing fuel tank grommet make sure both plastic through tubes are in the grommet and use a little dielectric grease on the grommet to insert it back into the tank. Very hard to insert it so be careful.)
Did you find this story helpful?
Thank you for voting!

Damage fuel system from alcohol in the fuel

Jim from Cascade Locks, Oregon

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench set
Replaced damaged parts
Did you find this story helpful?
Thank you for voting!

Gas line and muffler needed to be replaced

Doug from Osceola , Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Removed air filter to access fuel lines.
Had to removal plastic cowling to access muffler, removed old muffler and installed new one and put everything thing back together. Thanks to e-replacement with the parts they provided I got my rototiller running again.
Did you find this story helpful?
Thank you for voting!
  • 1