Part Location Diagram of 099980425079 Homelite Fuel Tank Cover
See part B82 in the diagram
( Grid squares measure 1x1 inch )

Fuel Tank Cover 099980425079

Manufactured by:
Homelite
ERP Number:
ERP9873292
Part Number:
099980425079
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic replacement part manufactured for use with Homelite pressure washers. The fuel tank cover is used to seal the tank and is removed to fill the tank. This fuel cap is sold as an individual replacement part, please note the fuel strainer is available separately.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Homelite
This part works with the following products:
  • Pressure Washer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Substantial rust inside fuel tank, rusty fuel cap, deteriorated fuel line, deteriorated fuel line connector/strainer

Neal from Boca Raton, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set, Wrench set
Parts Used:
099980425080, 099980425079
Overview: Homelite model UT80522 Pressure washer was stored with a partially filled fuel tank. Ethanol and water condensate caused severe rusting to the inside of the tank, and fuel cap. The modest cost of parts, ease or on-line ordering, and fast delivery from eReplacement Parts made it easier to replace the tank, cap, and ancillary pa rts rather than attempt to refurbish the original tank and cap.



Very straight forward repair and upgrade. Unbolt fuel tank at three mounting points, disconnect and discard low-quality OEM fuel line. Cut a piece of 3/16\" SAE fuel line to length and attach each end using hose clamps. Bolt new fuel tank in place. Needle nose pliers helpful for routing new fuel line. Take care not to crush. Nut driver or 1/4\" socket and extension used for tightening hose clamps. Socket set for two fuel tank mounting studs and 1 fuel tank mounting bolt.



Note that Homelite model UT80522 with G suffix uses a different fuel tank and cap than the other UT80522 series pressure washers. These parts are NOT interchangeable.



Parts needed:

Fuel Tank

Fuel cap

Nylon fuel tank outlet strainer/hose fitting (Fuel Tank Outlet Assembly)

Fuel tank filler strainer

2 hose clamps

3/16\" SAE fuel line
Did you find this story helpful?
Thank you for voting!
  • 1