Part Location Diagram of A226000700 Shindaiwa Trimmer Foam Pre-Filter
See part L-5 in the diagram
( Grid squares measure 1x1 inch )

Trimmer Foam Pre-Filter A226000700

Manufactured by:
Shindaiwa
ERP Number:
ERP9313973
Part Number:
A226000700
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Shindaiwa
This part works with the following products:
  • Hedge Trimmer
  • Trimmer
  • Brush Cutter
  • Leaf Blower / Vacuum
  • Edger
  • Water Pump
  • Power Broom

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Needed service

Earl from WINCHESTER, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
A369000440, 90118, A226000700
Replaced parts
Did you find this story helpful?
Thank you for voting!

The purge bulb had broken.

Jeff from Centre , Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1. Remove the gas tank.
2. Remove the old purge bulb.
3. Install the new purge bulb and reinstalled the gas tank.
Did you find this story helpful?
Thank you for voting!

Nothing wrong- just routine maintenance

Robert from ASHLAND, Massachusetts

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1. Gap new spark plug to factory setting.
2. Remove old spark plug using factory socket wrench.
3. Make a wire hook to grab fuel filter( it is located at the end of the fuel supply tube which is in the fuel tank).
4. Open clamp wire on fuel line to release fuel filter; reverse procedure to replace filter.
5. Remove air filers; undo filter cover wing nut to unhinge filter cover. Replace filters and replace filter retainer. Tighten finger tight.
Did you find this story helpful?
Thank you for voting!

No power

Felix from Lares, Puerto Rico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Just replaced the before mentioned parts. Now it works like new. Your website is easy and user-friendly.
Did you find this story helpful?
Thank you for voting!
  • 1