Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9306575-1-M-MTD-791-182099-Valve Cover Gasket
Part Location Diagram of 791-182099 MTD Valve Cover Gasket
See part B3 in the diagram
( Grid squares measure 1x1 inch )
9306575-1-S-MTD-791-182099-Valve Cover Gasket Part Location Diagram of 791-182099 MTD Valve Cover Gasket

Valve Cover Gasket 791-182099

Manufactured by:
MTD
ERP Number:
ERP9306575
Part Number:
791-182099
Original Equipment Manufacturer ?
$15.12
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an authentic OEM part for use with Troy-Bilt, MTD, Ryobi, Yard-Man and Bolens Trimmers, Cultivators and Tillers. The valve cover gasket forms a seal between the valve cover and cylinder head. This part is sold individually. The most common reason for replacing the rocker cover gasket is oil leaking from the cylinder head. The tools that you will need to replace the valve cover gasket is a 5/16 inch socket or nut driver.

Troubleshooting

This part works with the following brands:
  • MTD
  • Troy-Bilt
  • Ryobi
  • Yard Man
  • Cub Cadet
  • Craftsman
  • Bolens
  • Yard Machines
This part works with the following products:
  • Trimmer
  • Tiller
  • Cultivator
Part# 791-182099 replaces these:
753-1221, 791-182099,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Clutch drum bearing shot. Upper power boom drive shaft cable twisted off. Periodic valve lash adjustment.

James from Jet, Oklahoma

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
753-04503, 791-182099, 791-153592
Remove upper drive shaft. Hold fly wheel and remove clutch drum retaining screw. This screw is down where the drive shaft cable goes into the clutch drum. Install new clutch drum. Hold flywheel and tighten clutch drum attaching bolt. Remove engine cover and valve cover, adjust valve lash and install new valve cover gasket. Reinstall engin e cover.
Read less
Did you find this story helpful?
Thank you for voting!

Trimmer was running rough.

Jay from Rochester, Minnesota

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
794-00082, 791-182099
1. Removed the shroud per manual.
2. Unscrewed the valve cover and the adjusted valves.
3. Replaced the cover with the new gasket.
4. Replaced the spark plug with the new one using a spark plug wrench.
5. Put all shrouding back on and the tested the trimmer.
Did you find this story helpful?
Thank you for voting!

Severe oil leak

Richard from South Milwaukee, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Parts Used:
9094-1, 791-182374, 791-181018, 791-182099
Completely disassemble to replace gaskets and crankcase seal. Best to use Torx driven screw driver. Use loctite when reassembling. The torque is 6 - 12 inch lbs. Set the magneto gap to about .010 and check valve lash at .006.
Did you find this story helpful?
Thank you for voting!

Valve Cover gasket was broken causing oil to leak all over engine. Good time to change the oil.

Glenn from Essex, Maryland

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
791-182099
Remove engine cover.
Remove the screw for the rocker arm.
Take out broken gasket.
Install new gasket.
Reassemble rocker arm and engine cover.
Good time to change oil
Did you find this story helpful?
Thank you for voting!

Parts needed

Micah from Joshua, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
794-00082, 791-182099, 791-181757, 791-182098
Remove the valve cover and gasket. Clean the area where they are located. Install the gasket then the cover. Removed the air filter cover, then the old filter. Took the new filter and put it in a plastic bag with some oil in it. Agitated the filter in the bag. I then took the oiled filter and squeezed the excess oil into some paper towels . Then installed the new filter and the filter cover. Removed the old spark plug and gapped the new one at 0.025 then installed it in the cylinder head.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9306575
Manufacturer Part Number: 791-182099
Brand Model Number Description
Ryobi 1079r Trimmer - Handheld Trimmer
Ryobi 1090R Trimmer - 4-Cycle Gas Trimmer
Ryobi 11A-436N063 Trimmer - Trimmer
Ryobi 11A-436T063 Trimmer - Trimmer
MTD 21A-141R901 Tiller - MTD Tiller Model 21A-141R901 (21A141R901, 21A 141R901) Parts
MTD 21A-144R099 Tiller - MTD Tiller Model 21A-144R099 (21A144R099, 21A 144R099) Parts
MTD 21A-144R799 Tiller - MTD Tiller Model 21A-144R799 (21A144R799, 21A 144R799) Parts
MTD 21A5144R799 Cultivator - Farming
Troy-Bilt 21AA144R966 Cultivator - TB144 Cultivator
MTD 21AK510G034 Tiller - MTD Tiller Model 21AK510G034 Parts
MTD 21AS144R799 Tiller - MTD Tiller Model 21AS144R799 Parts
Troy-Bilt 21AT144R766 Cultivator - Tiller/Edger
Troy-Bilt 21AT144R966 Cultivator - Tiller/Edger
Troy-Bilt 21BA144R966 Tiller - Cultivator
MTD 21BK515G034 Tiller - MTD Tiller Model 21BK515G034 Parts
MTD 21BS144R799 Tiller - MTD Tiller Model 21BS144R799 Parts
Craftsman 29270 Edger - Cultivator Edger
Craftsman 31629270 Edger - Edger
Craftsman 316292701 Edger - Edger
Craftsman 316292710 Cultivator - Cultivator
Craftsman 316292711 Cultivator - Cultivator
MTD 41AD02OG965 Trimmer - MTD String Trimmer Model 41AD02OG965 Parts
MTD 41AD179A034 Trimmer - MTD String Trimmer Model 41AD179A034 Parts
Troy-Bilt 41AD260G401 Trimmer - Troy-Bilt String Trimmer Model 41AD260G401 Parts
MTD 41AD26BC401 Trimmer - MTD String Trimmer Model 41AD26BC401 Parts
MTD 41AD26BC701 Trimmer - MTD String Trimmer Model 41AD26BC701 Parts
MTD 41AD26BC901 Trimmer - MTD String Trimmer Model 41AD26BC901 Parts
MTD 41AD26BC965 Trimmer - MTD String Trimmer Model 41AD26BC965 Parts
MTD 41AD26CC401 Trimmer - MTD String Trimmer Model 41AD26CC401 Parts
MTD 41AD26CC701 Trimmer - MTD String Trimmer Model 41AD26CC701 Parts
Valve Cover Gasket
$ 15.12
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖