Chipper / Shredder Shredder Screen 781-0457-0637

Removed screen by pulling pins. Don\'t bother dismantling plastic chutes, just unbolt the chipper chute at the flywheel housing, and remove. Unbolt the half of the flywheel housing connected to the leaf chute and remove. This creates access to remove the chipper blades, the flails, and the shredder blade. Sharpen both blades on a grind ... Read more er or replace completely.Remove nuts on the ends of flail pins and pull to remove flails. I would recommend replacing flails and pin nuts. When reassembling pins and flails, use loctite on nuts. Reassemble flywheel half with leaf chute to flywheel and reattach chipper chute at flywheel housing. Replace screen. It\'s also handy to change the oil when flywheel is dismantled due to increased access. By replacing the bent and worn flails and screen, and sharpening the blades, the chipper was restored to its original operating efficiency.

Removed two screen pins and screen
Removed chipper chute
Removed bolts surrounding chipper/shredder housing
Separated chipper/shredder housing assemblies
Removed shredder blade center bolt
Removed two shredder blade side bolts
Removed two bolts on each of the chipper blades
Reversed the removals t ... Read more o install chipper blades,shredder blade and shredder screen

Replaced original broken screen with new part.

Two bolts , washers ,nuts. Works great

Replaced the worn out parts! Great replacements!