Part Location Diagram of V100000340 Shindaiwa Cylinder Gasket
See part A-2 in the diagram
( Grid squares measure 1x1 inch )

Cylinder Gasket V100000340

Manufactured by:
Shindaiwa
ERP Number:
ERP9234107
Part Number:
V100000340
Original Equipment Manufacturer ?
$5.95
Special Order
Minimum Quantity of 2 required

Easy 

1- 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This part is an OEM sourced directly from the manufacturer for use in edgers and trimmers made by Shindaiwa and Echo. The cylinder gasket attaches to the cylinder. An allen wrench might be needed during the installation process. It may become broken and will need to be replaced. This item is made of a thin material and is sold individually.

Troubleshooting

This part works with the following brands:
  • Shindaiwa
  • Echo
This part works with the following products:
  • Trimmer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Low compression, had no power.

Mike from MORRISTOWN, Tennessee

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
V100000340, A101000290
Hello, had to take the Engine cover off, took muffler cover off, took air filter off, Remove carburetor, insulator, took screws out of the head, Remove the head Gasket, clean the piston up removed old piston rings, put new piston rings on oiled Piston, piston cylinder. Put it all back together. Runs perfect, got power like it did when it was new. By the way, first time I have ever did that before. Job was so simple. PS if I ever have to do it again I will replace piston and put a new Cylinder head on, with new piston rings. DonGÇÖt think I will have to ever do that. But itGÇÖs a simple job, that Weed eater was $300.30 dollars. So rebuilding lot cheaper then buying a new one. Good luck with your fix. God Bless Mike
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9234107
Manufacturer Part Number: V100000340
Brand Model Number Description
Shindaiwa 81742 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa AH242 Hedge Trimmer - Hedge Trimmer
Shindaiwa AHS242 Hedge Trimmer - Articulated Hedge Trimmer
Shindaiwa C242 Brush Cutter - Brushcutter
Shindaiwa F222 Trimmer - Grass Trimmers (F)
Shindaiwa F222EPA2 Trimmer - Trimmer
Shindaiwa F222EVC Trimmer - Trimmer
Echo LE242 Edger - Lawn Edger
Shindaiwa M242 Multi-Tool - Multipurpose Tool Carrier
Shindaiwa T222 Trimmer - Trimmer
Shindaiwa T242 Trimmer - Trimmer
Shindaiwa T242EPA2 Trimmer - Trimmer
Shindaiwa T242EVC Trimmer - Trimmer
Shindaiwa T242X Trimmer - Trimmer