This replacement belt is an authentic OEM sourced component which is specially designed for use with Yard Machines, Troy-Bilt and MTD snowblowers. It is the belt which runs from the transmission pulley to the engine pulley. Unfortunately, over time belts tend to wear out and stretch eventually requiring a replacement to maintain top performance. This item is made of high-quality rubber and is sold individually. When connecting the belt on pulleys, first connect 2 or 3 teeth of the belt to the grooves of both pulleys, then turning the pulleys connect all teeth of the belt. Check the appropriate diagrams for your model for the correct installation procedure.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
went right on ready for snow
snow blower ready to go thanks
Guest - November 29, 2019
Verified Purchase
★★★★★
★★★★★
The belt
Thanks for the correct part it worked
John - October 30, 2020
Verified Purchase
★★★★★
★★★★★
What good service, also arrived one day earlier. Came just in time for our snow blower. Definitely rec replacement parts. Thank you very for your prompt service.
Good quality and fit perfect, thank you
Guest - November 20, 2020
Verified Purchase
★★★★★
★★★★★
Snowblower belt
Nothing worse than breaking a snowblower belt at the start of the winter. Found the part immediately (with the Model number), ordered it, and had it in a matter of days. Quick and easy!
Guest - December 21, 2020
Verified Purchase
★★★★★
★★★★★
Very fast service
The 2 belts fit perfectly and they arrived quickly
Anonymous - February 9, 2022
Verified Purchase
★★★★★
★★★★★
The belts were exactly what I needed. Great doing busmiss with you. You will be my 1st choice in the future.
The belt for the snowblower was exactly what I needed. Works great. Thanks
Guest - March 31, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(10 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Drive belt was worn out and would not move causing tension spring to fall off, (lost) and replaced the auger belt seeing as I was in that area any way.
Replaced both belts, tension spring, and fixed a gas leak. Machine needed to be stood on end to access and replace both belts. A pin that prevents the auger belt from jumping off the pulley also needed to be removed to replace the belt. A cover on the top side of the blower also needed to be removed to replace the belts. A bolt holding t
... Read morehe belt pulleys and spacer needed to be removed to replace the belts. Was a fun and rather easy job. The spring was replaced that holds tension on the drive belt and controls the dive gear assembly.
Read less
Did you find this story helpful?
Thank you for voting!
Broken belts and cables not throwing the snow anywhere.
With the unit off and cold I removed the belt cover and slipped off the old belts. They were so bad I didn\'t need any tools. Both belts have spring loaded pulleys so to install the belts I slipped on the inside belt first and then the outer one. The cable had 2 hooks and a pulley. With the old cable broken I simply unhooked both ends. I
... Read morere-hooked the end attached to the belt pulley and than ran the cable to the handle. The handle snaps in and out so I removed it and hooked on the cable, then snapped the handle back in.
Took the belt cover off and pulled the back belt (impeller) off then I removed the front belt (drive) put the new front belt on and then the new back belt started the blower engaged the drive and impellers s to be sure that they were working properly before shutting it down and re-installing the belt cover.
1. Removed belt cover with 5/16 socket to unscrew metal screw.. used flat blade screw driver to push in plastic clips to pop off cover.
2. Used flat blade screw driver to help lift off old belt while using the tension rotors lever to take off the Tension of the pulley.
3. Now install the new belt again using the tension rotor
... Read morelever to help with the tension of the pulley. Looping it back on the way you removed the old one.
4. Now reinstall the belted cover in the reverse order. Install metal screw and your done. Remember not to over tightening the screw .
1. Drain the gas tank and turn off the gas flow valve.
2. Pull off the wire from the spark plug.
3. Tip the machine up on the auger shroud.
4. Secure the handles with a strap when needed to adjust the tension on the pulleys to manipulate the drive and the auger belts off and then on to the pulleys.
5. Upright the m
... Read moreachine.
6. Adjust the auger tension bracket to remove the slack in the cable.
7. Add gas, turn on the gas flow valve, reattach the spark plug wire
8. Test.
9. Adjust the auger tension bracket as needed.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9174809
Manufacturer Part Number: 954-04014
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
