Part Location Diagram of 92192-2130 Kawasaki Tube,3x5x174
See part G-92192 in the diagram
( Grid squares measure 1x1 inch )

Tube,3x5x174 92192-2130

Manufactured by:
Kawasaki
ERP Number:
ERP9160196
Part Number:
92192-2130
Original Equipment Manufacturer ?
$11.97
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic manufacturer-sourced component which is designed for use with Kawasaki equipment. It is an identical replacement for a damaged or a missing tube that was installed on a new unit. This is the special pipe that fuel would travel through. Over time the material will wear out and it may begin to crack eventually requiring a replacement. It is made of high-quality rubber and is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Kawasaki
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fuel leak

Steven from Aston, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Removed 3 screws with Phillip\'s Head Screw Driver to remove tank. Used small flat head screw driver to pry rubber fuel gasket out,replaced all parts and put back together less then 30 minutes.
Did you find this story helpful?
Thank you for voting!

Tank leaked fuel

Bradford from CROWLEY, TX 76036, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1. Removed old Grommet Very, very hard to get out , almost had to cut it, but WD 40 help
2. Worst part putting new tubes into new grommet.
3. Next lots WD 40, etc to get unit into tank
4. Last to get correct tube lengths

These 3 parts should be sold as 1 UNIT
Did you find this story helpful?
Thank you for voting!

Grommet in the fuel tank leaked fuel.

Christopher from Shreveport, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers
1. I removed the old grommet from the fuel tank, along with it came the two fuel lines and the fuel filter.
2. I removed the fuel lines from the carburetor.
3. I used dielectric grease to lube the grommet and slid the two fuel lines through the grommet.
4. I installed the new fuel filter with the little clamp.
5. I installed the new grommet into the fuel tank.
6. I reattached the two fuel lines to the carburetor making sure to correctly attach the intake and return lines to their correct place on the carb,
7. Filled the tank with fuel and cranked the edger, problem solved!
Did you find this story helpful?
Thank you for voting!
  • 1