Part Location Diagram of 791-182607 MTD Primer Bulb
See part A3 in the diagram
Replacing your Ryobi Leaf Blower / Vacuum Primer Bulb
( Grid squares measure 1x1 inch )

Primer Bulb 791-182607

Manufactured by:
MTD
ERP Number:
ERP9137127
Part Number:
791-182607
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Craftsman replacement part that has been sourced from the original manufacturer to be used with blowers. The primer assembly is part of the fuel system. This item is used to cycle fuel from the tank, through the carburetor, and back to the tank. This assembly includes the primer and two fuel lines.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Ryobi
  • MTD
  • Bolens
  • Craftsman
This part works with the following products:
  • Leaf Blower / Vacuum
Part# 791-182607 replaces these:
791-182440, 791-182524, 791-182607,

Videos For installing this part.

?
Replacing your Primer Bulb

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Fuel lines wore out, fell off, engine no longer ran.

Robert from Santa Rosa, California

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Parts Used:
5688002, 791-182607, 791-182353
1. Removed what was left of the fuel line,
2. removed old primer bulb,
3. Removed old fuel filter.
4. Followed the instructions in your how-to videos, installing the new primer bulb.
5. Installed the new fuel filter. This was the hardest to do due the fact the filter seats in an opening not easy to get to.
6. Installing the remaining replacement fuel lines.
6. All of this was made easier with your You-Tube how-to videos!
Did you find this story helpful?
Thank you for voting!

Needed fuel lines replaced. dryrotted hoses crumbled to peices.

ROBERT from BAYTOWN, Texas

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Had to remove carb & cover to pull fuel tank to get to hose connections. My first time so I did it best that I could. I learned a little bit more than before I started , thanks
Did you find this story helpful?
Thank you for voting!

Rotted fuel lines

Rich from Gilbert, Arizona

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
791-181086, 791-182607
I began by accessing the carburetor and removing the old lines there. I installed the new lines and fed them through the tank. While handling the carb I removed it and put on the primer bulb.
Did you find this story helpful?
Thank you for voting!

Primer bulb was cracked.

James from Fort Jennings, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
791-182607
Removed old primer bulb and replaced with new one. I had to reattach fuel lines as well. I did use one of the fuel lines that came with the primer bulb to replace an old one.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9137127
Manufacturer Part Number: 791-182607
Brand Model Number Description
Bolens 21AK410G163 Cultivator - Cultivator
MTD 21BK410G163 Tiller - MTD Tiller Model 21BK410G163 Parts
Craftsman 316797210 Leaf Blower / Vacuum - Blower
Craftsman 316797211 Leaf Blower / Vacuum - Blower
Ryobi 330B Leaf Blower / Vacuum - 2-Cycle Gas Blower
Ryobi 340BV Leaf Blower / Vacuum - 2-Cycle Gas Blower
MTD 41BS340G034 Leaf Blower / Vacuum - MTD Leaf Blower Model 41BS340G034 Parts
MTD 41CS340G034 Leaf Blower / Vacuum - MTD Leaf Blower Model 41CS340G034 Parts
MTD 41DS340G034 Leaf Blower / Vacuum - MTD Leaf Blower Model 41DS340G034 Parts
Bolens BL410 Tiller - Tiller