Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9118007-1-M-MTD-750-04936-Spacer- .792 X 1.0
Part Location Diagram of 750-04936 MTD Spacer- .792 X 1.0
See part G-34 in the diagram
( Grid squares measure 1x1 inch )
9118007-1-S-MTD-750-04936-Spacer- .792 X 1.0 Part Location Diagram of 750-04936 MTD Spacer- .792 X 1.0

Spacer- .792 X 1.0 750-04936

Manufactured by:
MTD
ERP Number:
ERP9118007
Part Number:
750-04936
Original Equipment Manufacturer ?
$10.77
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Repair Instructions Model Cross Reference

Product Description

?

It is an authentic manufacturer-sourced component which is specially designed for use with lawn and garden equipment. The purpose of this spacer is to provide a tight fit between connected parts. If the original item is damaged or is missing, this will provide an identical replacement. This spacer is made of high-quality metal and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure. A wrench set might be needed to perform this repair.

Troubleshooting

This part works with the following brands:
  • Cub Cadet
  • Craftsman
  • Troy-Bilt
  • MTD
  • Yard Machines
  • Murray
  • Husky
  • Yard Man
  • DeWALT
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
  • Engine
  • Lawn Tractor Accessories
Part# 750-04936 replaces these:
750-04936, 750-04936-CM,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The bearing on mower deck wore out

William from Yorktown, Texas

9 of 9 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
750-04936
Remove the blade housing
Replace the bearings and spacer
Grease the bearings
Reinstall the blade housing
Did you find this story helpful?
Thank you for voting!

Bearings on the blade spindle failed and the drive belt needed replacing so I replaced all belts

Mark from Brainerd, Minnesota

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
954-04208A, 954-0467A, 954-04219, 750-04936
I found several U tube videos on replacing the parts. While not exactly the same, it was enough to guide me through the process. The most difficult part was getting the belts off and new ones on. It is definitely advisable to take pictures before during and after disassembly. Removing the battery under the seat to get to the main drive be lt was necessary as well as removing some pulleys to get the belts off and on. Purchasing the parts for the spindles was much less expensive than purchasing the assembled spindle, and not that difficult to assemble. Initially I did not think I had a choice but with a little more digging I found the individual bearings and sleeve parts. I did not have the 1\" socket needed to hold the nut on the fly wheel in place while removing the pully below so I used a pipe wrench between the two pulleys to hold the drive shaft in place when removing and installing the bolt below to drop the pulleys. I was concerned that I would twist the bolt off on the bottom of the drive shaft so called Sears to make sure it was not reverse threaded. Last thing I needed was to have to drill out a broken bolt. It turns out that the bolt was just very tough to loosen.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9118007
Manufacturer Part Number: 750-04936
Brand Model Number Description
Troy-Bilt 1153487 Lawn Tractor - 1153487 - 17-Z Series
Troy-Bilt 1153765 Lawn Mower - 1153765 - Self Propelled Mowers
Troy-Bilt 1157869 Lawn Tractor - 1157869 - 17-Z Series
Troy-Bilt 1157992 Lawn Tractor - 1157992 - 17-Z Series
Troy-Bilt 1158038 Lawn Tractor - 1158038 - 17-Z Series
Troy-Bilt 1158074 Lawn Tractor - 1158074 - 17-Z Series
Troy-Bilt 1158283 Lawn Tractor - 1158283 - 17-Z Series
Troy-Bilt 1171042 Lawn Tractor - 1171042 - Lawn Tractors
Troy-Bilt 1174058 Lawn Tractor - 1174058 - 17-Z Series
Troy-Bilt 1179950 Lawn Mower - 1179950 - Self Propelled Mowers
Troy-Bilt 12ABW32G766 Lawn Mower - Lawn Mower
MTD 12ABW32G897 Lawn Mower - Lawn Mower
Troy-Bilt 12ABW34K711 Lawn Mower - Lawn Mower
MTD 12ABW35T799 Lawn Mower - Lawn Mower
Troy-Bilt 12ABW3T6766 Lawn Mower - Self-Propelled Walk-Behind Mower 12abw3t6766 Tbwc28 (2023)
Troy-Bilt 12ABW62G766 Lawn Mower - Lawn Mower
Cub Cadet 12ACW62R709 Lawn Mower - CC600 Self Propelled Walk Behind Mower
Cub Cadet 12ACW62R710 Lawn Mower - Cc 600 Self Propelled Walk Behind Mower
Cub Cadet 12ACW62R756 Lawn Mower - Cc 600 Self Propelled Walk Behind Mower
Cub Cadet 12ACW6M9710 Lawn Mower - 12acw6m9710 Cc 600 (2020)
Cub Cadet 12AE76JU009 Lawn Mower - Cc 760 Es, Cc 760 Es
Cub Cadet 12AE76JU010 Lawn Mower - Cc 760 Es, Cc 760 Es
Troy-Bilt 12AE76JU011 Lawn Mower - Lawn Mower
Cub Cadet 12AE76JU056 Lawn Mower - Cc 760 Es, Cc 760 Es
Troy-Bilt 12AE76JU066 Lawn Mower - Lawn Mower
Cub Cadet 12AE76M8010 Lawn Mower - Cc 800 Self Propelled Walk Behind Mower
Troy-Bilt 12AE76M8011 Lawn Mower - Lawn Mower
Cub Cadet 12AE76M8056 Lawn Mower - 12ae76m8056 Cc 800 (2018)
Troy-Bilt 12AE76M8066 Lawn Mower - Lawn Mower
MTD 12AE76M8897 Lawn Mower - Lawn Mower
Spacer- .792 X 1.0
$ 10.77
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖