Part Location Diagram of 7010986YP Murray BEARING, Nylon
See part L-10 in the diagram
( Grid squares measure 1x1 inch )

BEARING, Nylon 7010986YP

Manufactured by:
Murray
ERP Number:
ERP9081218
Part Number:
7010986YP
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(7 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This nylon king pin bushing/bearing is a genuine OEM approved replacement part. It is commonly used on riding lawn mowers/tractors. This is the item which fits the spindle king pin and allows it to move freely. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Includes one (1) nylon bearing per order. To complete this repair you would need pliers and a set of socket wrenches.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Snapper
  • Craftsman
  • Murray
  • Briggs and Stratton
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
Part# 7010986YP replaces these:
7010986YP,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Steering very loose,linkage loose,bushings missing.

Nicholas from West Lafayette, Indiana

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers
Lift front end.
Remove cotter pins.
Remove linkage.
Remove bushings & bearings.
Replace bushings & bearings.
Replace linkage.
Lower mower.
Check steering.
Start mowing.
Did you find this story helpful?
Thank you for voting!

lost my hub cap

Pat from NOTASULGA, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
7011022YP, 7010986YP
put grease in the fitting, snap the cap on
Did you find this story helpful?
Thank you for voting!

Replaced nylon bushing on steering shaft and linkage arms

dennis from st augustine , Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable)
Very simple , remove keeper clips, shaft will fall out. Remove the old bushings and shaft and install the new ones. no grease needed on bushings.
Did you find this story helpful?
Thank you for voting!

Top Bushings on both Front Wheel Assy Shafts worn out.

Hogan from MILLEDGEVILLE, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
7010986YP
1. Remove the retaining ring and washer below the retaining ring.
2\' Remove any remaining portion of the worn out bushings and install new bushings in their place. 3. Reinstall washer and retaining ring.
Did you find this story helpful?
Thank you for voting!

Too much slack in front end and steering parts

James from LAFAYETTE, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
7019166YP, 7010986YP, 7010935SM
Took off front tire after I jacked it up, replaced cotter pins, replaced old grease with new one for bearing. Knocked out the bushing and replaced with new one, added shimm washer to make tires fit properly on axle. Done same thing on the other side. Replace steering wheel bushing with new one. Adding shims to it to make it tighter also. Grease up outer bearings on both sides, finish up job and put mower back on ground.

Did you find this story helpful?
Thank you for voting!

All steering bushings worn out. Friction disk was worn.

Bryan from BILLINGS, Montana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Steering:
Removed the steering wheel roll pin.
Removed the cutter pins from all steering joints.
Removed the steering shaft.
Replaced all bushings and cutter pins.

Friction Disk:
Removed 4 nuts holding the outer plate and paper thrust washer.
Replaced the friction disk.
Installed thru st washer and outer plate along with nuts.

Did you find this story helpful?
Thank you for voting!

Snapper riding mower had to much play in the steering

Buddy from Hillsboro, Missouri

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
7010986YP, 7010935SM, 7013321YP
1. Remove both front tires
2. Remove all cotter keys from steering parts
3. Remove snap-rings from both spindles
4. Install new bearings, 8, in spindles and tie rod ends
5. This tightened up the steering
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9081218
Manufacturer Part Number: 7010986YP
Brand Model Number Description
Craftsman 107280340 Lawn Tractor - Lawn Tractor
Craftsman 107280340-7800669,S2812BVE Lawn Tractor - 107.280340 - 7800669, S2812bve, Craftsman 12.5hp 28" Rear Engine Rider (2010)
Craftsman 107280341 Lawn Mower - 28 Inch Rear-Engine Riding Mower 12.5hp
Snapper 2201080015M Lawn Mower - Snapper Lawn Mower Model 2201080015M Parts
Snapper 2201080045M Lawn Mower - Snapper Lawn Mower Model 2201080045M Parts
Snapper 2201080075M Lawn Mower - Snapper Lawn Mower Model 2201080075M Parts
Snapper 250610T Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 10
Snapper 250612T Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 12
Snapper 25062 Lawn Tractor - 25" 6 Hp Rear Engine Rider
Snapper 25062S Lawn Tractor - 25" 6 Hp Rear Engine Rider
Snapper 25063 Lawn Tractor - 25" 6 Hp Rear Engine Rider
Snapper 25063S Lawn Tractor - 25" 6 Hp Rear Engine Rider
Snapper 25064 Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 4
Snapper 25064S Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 4
Snapper 25065 Lawn Mower - 25" 6 Hp Rear Engine Rider Series 5
Snapper 25065S Lawn Mower - 25" 6 Hp Rear Engine Rider Series 5
Snapper 25066 Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 6
Snapper 25066S Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 6
Snapper 25069T Lawn Tractor - 25" 6 Hp Rear Engine Rider Series 9
Snapper 250811BE Lawn Tractor - 25" 8 Hp Rear Engine Rider Series 11
Snapper 250812BE Lawn Tractor - 25" 8 Hp Rear Engine Rider Series 12
Snapper 250813BE Lawn Tractor - 25" 8 Hp Rear Engine Rider Series 13
Snapper 250814B Lawn Tractor - Rear Engine Rider Series 14
Snapper 250814BE Lawn Tractor - Rear Engine Rider Series 14
Snapper 250815B Lawn Tractor - Rear Engine Rider Series 15
Snapper 250815BE Lawn Tractor - Rear Engine Rider Series 15
Snapper 250816B Lawn Tractor - 25" 8 Hp Rear Engine Rider Series 16
Snapper 250816BE Lawn Tractor - 25" 8 Hp Rear Engine Rider Series 16
Snapper 25083 Lawn Tractor - 25" 8 Hp Rear Engine Rider
Snapper 25083S Lawn Tractor - 25" 8 Hp Rear Engine Rider