This replacement part is sourced from original equipment manufacturer for use with Briggs and Stratton engines. Its purpose is to filter out dust and debris from contaminating engine. This cartridge will get dirty over time requiring replacement. It is made out of pleated paper with a plastic base/frame. Includes one (1) filter cartridge per order. Replacing air filter is an easy and quick job. You would need a wrench to complete this repair. • First remove bolt that secures filter cover • Remove cover and filter retainer • Take out old air filter • Clean out filter housing • Place new air filter in the case • Reassemble and test the engine
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
right parts and right price
fast service and right parts for the machine. when I need more I will be back
Guest - July 24, 2019
Verified Purchase
★★★★★
★★★★★
good part
good part
Gerald - August 27, 2019
Verified Purchase
★★★★★
★★★★★
Chipper Safety breather
My wood chipper has been in storage for years. The engine housing with lots of open space became the living area for many mouse families. They completely destroyed the original air filter.
Guest - May 14, 2020
Verified Purchase
★★★★★
★★★★★
easy fix, just hard to find parts for such an old unit.
Filter fit fine , just hard to locate parts for such an old unit.
Guest - May 13, 2020
Verified Purchase
★★★★★
★★★★★
Good quality.
Fit perfect. It was made for my engine, not a universal part.
Guest - December 24, 2020
Verified Purchase
★★★★★
★★★★★
Fleased
I installed their side mirror not realizing their was a slight difference in the turn signal lighting from the other oem side of my vehicle. Since I installed it they will not replace or return. Beware of these people. The parts are also cheap. The mirror glass vibrates and it is difficult to see it.
Guest - May 11, 2019
Verified Purchase
May 11, 2019
Hello Michael, thank you for your review. However, this order was not for a turn signal this was for an air filter cartridge.
★★★★★
★★★★★
Service | Order Part, then need to add Part | Left message | Nada Support
I ordered a part then order filter as addon. Indicated next day shipment. Tried to combine part shipments to reduce cost. Help desk was either closed or over utilized, not good. Looked as though both shipment were coming, nope only filter - second item came. The real part needed was over a week and the part passed over my state and settled in NY for over a weekend or more. Horrible support and service. May not ever use you again. Real bad service and support. Just basics are killing you company!!!
Guest - June 1, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove air filter assembly, remove pull start housing (4 bolts), remove broken connector from wire, squeeze two sides of switch with pliers and slide switch from housing. Push new switch in hole, connect wire. replace start housing back in place connect air filter housing with new filter. Replaced fuel filter while I was at it, Pliers req
... Read moreuired for clamps..
Removed the air filter housing to get to the carburetor. Removed and cleaned. Replaced with the new gaskets and the air filter. Changed the plug. Ran like a champ.
Did you find this story helpful?
Thank you for voting!
Purchased an older model machine that was missing air cleaner, bracket, and pre-filter.
Simply oiled the pre-filter, patted the excess oil into an absorbent towel, assembled into the retainer that I purchased and installed into the carburetor casing. Was happy to be able to find the part at ereplacement as with the age of the machine the part was not readily available.
Removed two screws; removed air filter housing.
Removed air filter and pre filter.
Cleaned in and around housing with compressed air and lint-free rag.
Installed new filters and housing.
1 removed carburetor
2 dissembled carburetor
3 removed front housing to remove switch
4 ordered parts
5 installed parts
6 started chipper worked first time
good parts
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
