This on-off switch fits Briggs and Stratton engines. This is a genuine part supplied from original manufacturer. This switch controls the on-off function of the engine. It has a plastic knob with metal terminals and is sold individually. To complete this repair you will need a wrench to remove housing.
Troubleshooting
This part works with the following brands:
Briggs and Stratton
Toro
Cub Cadet
Simplicity
This part works with the following products:
Engine
Dethatcher
Chipper Shredder
Part# 692309 replaces these:
396691,
★
Customer Part Reviews
?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(14 Reviews)
Click to filter by ratings:
5 stars
13
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
Was the exact part as original. Quick and easily replaced.
Guest - January 18, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit
Rotary switch was exact replacement. My generator works fine now.
Guest - July 18, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
The part was identical to the original, even though my generator is 20 years old! Snapped it in, off she went! Works perfect!
Guest - October 6, 2020
Verified Purchase
★★★★★
★★★★★
Exact replacement
Arrived in good condition
Worked well as expected
Guest - December 6, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Received switch quickly and was an easy project to complete
Guest - October 20, 2021
Verified Purchase
★★★★★
★★★★★
As Advertised worked great
Simple to install worked perfectly.
Guest - November 11, 2021
Verified Purchase
★★★★★
★★★★★
Replacement switch
This is a Great website to get parts. It is so user friendly and so easy to order and get in a very short time.
Thank You so Much!!
Guest - May 16, 2022
Verified Purchase
★★★★★
★★★★★
Haven’t had a chance to install it
The part is exactly like the original
Guest - November 26, 2022
Verified Purchase
★★★★★
★★★★★
Generator engine on/off switch
Easy to install on my Briggs generator engine. Works well.
Guest - June 2, 2023
Verified Purchase
★★★★★
★★★★★
Small engine on/off switch
Arrived quickly, fit perfect, worked perfectly
Guest - November 3, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Press tabs on the side of the defective switch to release it. Install leads on the new switch like they were on the old one, then just snap it back in the housing
Did you find this story helpful?
Thank you for voting!
Old rotary switch broke apart and ground wire to switch was grounding itself out preventing spark for ignition
Removed the shroud housing the pull cord and rotary switch. Pushed old broken switch up thru hole in housing. Pushed new switch down thru hole in housing. Plugged ground wire on to tab on new switch. Reinstalled housing. Done
Removed the engine cover----4 bolts, squeezed tabs on old switch and removed it. popped replacement switch into hole in engine cover---slid wire onto switch tab----replaced engine cover with 4 bolts---7/16 wrench
1. Removed starter rope from generator
2. Removed air filter assembly
3. Removed electrical piece from side of cover
4. Removed four bolts from cover
5. Popped old ignition switch out after disconnecting the wire
6. Put new end on the connecting wire to ignition switch
7. Put new ignition switch in cove
... Read morer and plugged it in
8. Put cover on and reassembled it.
Removed 4 bolts holding the cover on, squeezed the sides of old switch with pliers to remove from housing, put new switch in place, removed old v-type connector from ground wire( which was left from old switch), slid the slide-on connector on ground wire onto the new switch, bolted the cover back on, done. Started the engine to make sure
... Read more it worked. It did.
Remove air filter assembly, remove pull start housing (4 bolts), remove broken connector from wire, squeeze two sides of switch with pliers and slide switch from housing. Push new switch in hole, connect wire. replace start housing back in place connect air filter housing with new filter. Replaced fuel filter while I was at it, Pliers req
... Read moreuired for clamps..
Removed 5 screws to remove air filter shroud. Removed 4 screws to remove starter rope shroud. Removed wire from switch. Popped switch from shroud. Popped new switch into shroud and connected wire. Reinstalled shrouds.
Removed the cover and pushed out the old switch, took the wires from the old switch and connected them to the new switch and pressed the switch in the cover, the replaced the cover
Did you find this story helpful?
Thank you for voting!
Housing was broken...had no support for the recoiler
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
