This is an authentic replacement part manufactured for use with lawnmower small engines. The o-ring seal is commonly used to seal the oil pump cover. This o-ring is sold as an individual replacement part, please see model diagram for associative parts.
Removed Engine, removed oil pump, removed oil pan, spent a great deal of time removing the old gasket taking care to prevent pieces from entering the engine. Removed seal, reinstalled new seal, reinstalled new gasket, replaced oil pan, replaced oil pump and o-ring, reinstalled engine, installed new drive belt, started and checked for lea
... Read moreks and proper operating. Everything fit perfectly and now with a new dry drive belt the mower is once again moving forward and backward at the desired speed without the essence of burning belt and oil.
A note of caution, when reinstalling the oil pan over the non chamfered crankshaft the seal is very easily damaged. It requires assistance in the form of carefully manipulating the seal over the crankshaft. I used a jewelers hex screwdriver but any small blunt object to guide the seal without cutting would suffice. Also scribing a reference mark on the the governor arm and shaft ensures it goes back on in the proper position. If you forget to do this you must reference technical data for proper installation to prevent engine overspeed damage. Simple procedure but too long to write in space provided.
Read less
Did you find this story helpful?
Thank you for voting!
The governor blew up inside the case.
Dave from Lamar, Arkansas
2 of 2 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Drained the oil, removed the engine from mower, removed oil pump, split the case cleaned all the old gasket material, cleaned both halves of the case, replaced the governor assembly, installed new gaskets, put the case back together, put engine back on mower, installed clutch and pulley system, adjusted the governor, started the mower
... Read more and when to mowing the yard, no issues, and ran like a brand new mower.
Read less
Did you find this story helpful?
Thank you for voting!
governor was broke
J.K. from Bridgeport, West Virginia
1 personfound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Lawn Mower
- Cub Cadet Lawn Mower Model 13CD608G101/SERIAL: 1I010H - 1H311H (13CD608G101/SERIAL:1I010H1H311H, 13CD608G101/SERIAL: 1I010H 1H311H) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/engine/seals-and-gaskets/"},{"position":2,"name":"690589","title":"690589","url":""}]
_WW_13.gif "Part Location Diagram of 690589 Briggs and Stratton Seal-o Ring")
_WW_13.gif "Part Location Diagram of 690589 Briggs and Stratton Seal-o Ring")
