Part Location Diagram of 575568001 Husqvarna Clutch Assembly
See part C-1 in the diagram
( Grid squares measure 1x1 inch )

Clutch Assembly 575568001

Manufactured by:
Husqvarna
ERP Number:
ERP9033304
Part Number:
575568001
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This clutch assembly is an original part from Husqvarna. Compatible with several chainsaws, the assembly is fitted inside the clutch drum. The metal clutch allows the motor to idle without driving the saw. Please refer to the specific manual for repair instructions. The clutch assembly is sold as an individual item. A hex key, screwdriver and a pair of pliers may be necessary for the installation.

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • RedMax
This part works with the following products:
  • Chainsaw
Part# 575568001 replaces these:
544871201, 575568001,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

General wear & tear of clutch drive and chain drive area..

John from Thornhurst, Pennsylvania

3 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1. Remove chain and bar.
2. Remove spark plug and insert short length of rope (enough to stop the piston from completing a stroke) leaving enough to grip for removal latter.
3. Place punch on outer portion of clutch assembly but inside the clutch drum and strike with hammer to loosen/unscrew clutch (counter-clockwise).
4. Remove clutch, drum and worm gear assemblies.
5. Install new parts in reverse order they were removed.
6. On Cover use screwdriver to remove screw on worn cover lid, remove and replace.
Notes: Use safety glasses if using compressed air to blow off debris, disposable gloves are recommended, and remove rope from cylinder before replacing spark plug (it was only used to keep the piston from reaching top of stroke so that the clutch assembly could be unscrewed and screwed back on).
Did you find this story helpful?
Thank you for voting!

Weak clutch.

roger from little rock, Arkansas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
544284601, 575568001
1. Removed the cover, the bar and the chain.
2. Tapped the clutch with a chisel and a hammer.
3. Spun the clutch off (notch provided).
4. Removed the retaining screw holding the chain guide plate.
5. Guide plate lifts off.
6. Installation is in reverse order.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9033304
Manufacturer Part Number: 575568001
Brand Model Number Description
Husqvarna 210C Lawn Mower - Automower 210c (2009-02)
Husqvarna 435 Chainsaw - Chainsaw
Husqvarna 435-435E Chainsaw - 435 - 435e (2011-05)
Husqvarna 435E Chainsaw - Chainsaw
Husqvarna 435EII Chainsaw - Chain Saw
Husqvarna 435II Chainsaw - Chain Saw
Husqvarna 440 Chainsaw - 440 E-Series Ii
Husqvarna 440E Chainsaw - Chainsaw
Husqvarna 440EII Chainsaw - Chain Saw
Husqvarna 440II Chainsaw - Chain Saw
Husqvarna 540XP Chainsaw - 540 Xp® Mark Iii
Husqvarna 965167936 Chainsaw - Gas Chainsaw
Jonsered CS2240 Chainsaw - Chain Saw
Jonsered CS2240S Chainsaw - Chain Saw
RedMax GZ381 Chainsaw - Chain Saws
Husqvarna T540XP Chainsaw - Chain Saw
Husqvarna T540XPII Chainsaw - Chain Saw