Part Location Diagram of 545008030 Husqvarna Chainsaw Purge And Line Assembly
See part B-2 in the diagram
( Grid squares measure 1x1 inch )

Chainsaw Purge And Line Assembly 545008030

Manufactured by:
Husqvarna
ERP Number:
ERP9029306
Part Number:
545008030
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

15 - 30 mins 

(5 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic OEM part for use with Husqvarna and Jonsered Chain Saws. Primer bulb circulates fuel to the carburetor to provide quicker starting. The most common reasons for replacing the primer bulb is if the engine is not starting easily (multiple pulls of the starter rope required) the fuel is leaking from primer bulb and from the primer hose, the Primer bulb is cracked and the engine is not priming. Here is a list of tools that are needed to replace the primer bulb Phillip's screwdriver, various Torx drivers, a receptacle for draining fuel, Ratchet/socket set and Long-nosed pliers.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Craftsman
  • RedMax
This part works with the following products:
  • Chainsaw
Part# 545008030 replaces these:
545008030,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Hole in purge bulb, no fuel to carburetor

Alan from Christiansburg, Virginia

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
545061801, 545008030
Remove and replace purge bulb and line, just snaps in very basic. I also replaced the air filter.
Did you find this story helpful?
Thank you for voting!

Replaced purge bulb

Robert from BENTLEYVILLE, Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
545008030
Removed the side case, undo the gas hoses, reconnected gas hoses onto new purge bulb, and put the side case back on... It was an easy fix......
Did you find this story helpful?
Thank you for voting!

Would not stay running.

Martin from Acampo, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
545008032, 545008030
Removed all the plastic components needed to remove the carburetor. You tube was very helpful in the process. Rebuilt carb with master kit that I had purchased. Did have to purchase carb adjustment tool as well as kit. High and low air fuel mixture screws needed to be initially set to 2 turns counter clockwise from bottomed out just to ge t mine to idle. You tube said 1-1/4 but that didnGÇÖt work on mine.
Did you find this story helpful?
Thank you for voting!

primer bubble split

Keith from Camilla, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
545008030
removed cover, removed bubble, installed new one
Did you find this story helpful?
Thank you for voting!

Fuel bubble primer cracked and leaked

Steve from Tie Siding, Wyoming

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
545008030
Removed the top engine cover.
Pressed the bubble outboard
Removed and reinstalled both fuel lines
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9029306
Manufacturer Part Number: 545008030
Brand Model Number Description
Husqvarna 120 Chainsaw - 120 Mark Ii
Husqvarna 1202020 Chainsaw - 120 2020- (Us/Ca)
Husqvarna 120E Chainsaw - 120e Mark Ii
Husqvarna 120EMARKII Chainsaw - Chain Saw
Husqvarna 120MARKII Chainsaw - Chain Saw
Husqvarna 120MARKIII Chainsaw - 120 Mark Iii
Husqvarna 125LDX Trimmer - String Trimmer
Husqvarna 125LDXTEST Trimmer - 125ldx Test (2010-06)
Husqvarna 230 Chainsaw - Chain Saw
Husqvarna 235 Chainsaw - Chainsaw
Husqvarna 235E Chainsaw - Chainsaw
Husqvarna 236 Chainsaw - Chain Saw
Husqvarna 236E Chainsaw - Chain Saw
Husqvarna 240 Chainsaw - Chainsaw
Husqvarna 240E Chainsaw - Chainsaw
Husqvarna 240ETRIOBRAKE Chainsaw - Chain Saw
Craftsman 358381600 Chainsaw - Chainsaw
Husqvarna 952802268 Chainsaw - Husqvarna Chainsaw Model 952802268 Parts
Jonsered CS2234 Chainsaw - Chain Saw
Jonsered CS2234S Chainsaw - Chain Saw
Jonsered CS2238 Chainsaw - Chain Saw
Jonsered CS2238S Chainsaw - Chain Saw
RedMax GZ380 Chainsaw - Chainsaw