This is an OEM part sourced directly from the manufacturer. The control cable is commonly found in Craftsman lawn mowers. This part is a metal cable with a flexible plastic casing, and is used to connect the controls on the handle bar with the machine. You may require a screwdriver when replacing this item. The control cable is provided as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Replacements part
It was a good experience. I ordered the wrong part and they wear great in giving me a refund =ƒÿü
Guest - April 28, 2020
Verified Purchase
★★★★★
★★★★★
Control cable
Arrived fast no problem part worked great mower going great
Guest - May 1, 2020
Verified Purchase
★★★★★
★★★★★
Lawnmower repair
Easy to find on the website quick shipping and very reasonably priced
Guest - May 11, 2020
Verified Purchase
★★★★★
★★★★★
Right part, easy repair, lawnmower is back to normal. Thank you
Love the sight. Thanks for your fast response. Back to mowing, with ease.
Chuck - May 30, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
It arrived fast and after reviewing the instructions again, was easy to repair. The lawn mower works great again.
Guest - June 15, 2020
Verified Purchase
★★★★★
★★★★★
Great parts
Just found other issues with mower not worth dealing with
Guest - September 4, 2021
Verified Purchase
★★★★★
★★★★★
Parts
I was completely satisfied with the product, shipping was fast.
Guest - July 4, 2022
Verified Purchase
★★★★★
★★★★★
It works
No problem
Wayne - June 1, 2023
Verified Purchase
★★★★★
★★★★★
Perfect Part
The cable was exactly the part we needed to repair the mower & make it work.
Guest - September 23, 2023
Verified Purchase
★★★★★
★★★★★
Awesome, awesome, awesome parts and awareness.
I am very happy with my parts, you were the last place I looked and pray for my orders in the future. God bless you and you employees, and your company.
Robert - April 8, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Flipped the lawn mower over to release the broken end of the cable. Pulled the cable housing out. Couldn\'t get my pliers up to the bottom of the cap to remove the connector so I used a drill to remove it since I was throwing it out anyway. Replaced the cable and reconnected to the end and set the lawn mower back up. Used a screw dr
... Read moreiver to take apart the hand controls and reattached the top end.....
1. Make sure most of the gas is out of the gas tank. Will need to turn on side with gas cap on the upper side.
2. Power wash mower
3. Remove the battery
4. Remove the battery box (13mm socket)
5.Turn mower on side ( Ref. #1 above)
6. Secure mower to prevent movement (my preference: ratchet straps and hydrau
... Read morelic lift table)
7. Remove 2 each 8mm bolts from top of mower deck (one was under the battery box). The bolts hold the guard for the drive belt.
8. Remove the mower blade (14 mm socket)
9. Remove 1 each, 13mm bolt holding the guard for the drive belt.
10. Un-hook the remains of the old drive cable, needle nose pliers are handy.
11. Squeeze with pliers and pop the cable mount through the top of mower deck from the under side.
12. Use a torque screwdriver to remove the drive control handle mount. CAUTION: the control handle is spring loaded.
13. Carefully remove the old cable
14. Run new cable along the mounts built into the mower handle.
15. Carefully install the new cable
16. Bolt the hand control back on the mower handle.
NOTE: I put a spacer over the spring for the hand control. This enabled the cable about 1/4 inch more distance away from the drive belt. The Control Cable,
Part #: 532431650 fit perfect. It would have been nice if the if control cable could have been designed to be further away from the drive belt. If it breaks again, I will fix that.
16. Put everything back together
17. Warning! Let the mower set on it\'s wheels for several hours to let oil settle into the crankcase. You could damage your engine by attempting to start it too soon. Overall, this would have been a simple fix but I was trying to figure out how I could prevent it from happening again. Also, it is important to keep your drive cable adjusted properly.
Unplugged spark plug
Removed blade and belt cover
Disassembled lever control to remove cable
Removed belt pulley which is easier than getting to screws that loosen belt guards.
Installed cable in lever housing and reinstalled on handle bar
Cable tied belt around pulley to keep belt behind guards which screwin
... Read moreg pulley back on
Connected belt to engine shaft, cut cable tie, and hooked the cable to transmission
Installed belt cover
Sharpened blade and checked balance.
Installed blade and connected spark plug wire
Mowed grass
Lawn Mower
- Husqvarna Lawn Mower Model 96145000700 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2011-12)_WW_1.gif "Part Location Diagram of 532431650 Husqvarna Drive Cable")
(2011-12)_WW_1.gif "Part Location Diagram of 532431650 Husqvarna Drive Cable")
