It is a genuine component that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. This is an identical replacement for a missing or a faulty flange bearing that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and use of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.
1. Had to remove the mower deck
2. Disassemble the steering column.
3. Once disassembly was completed, the rest was straight forward. It wasn\'t all rusted fast. Things came apart easily.
Did you find this story helpful?
Thank you for voting!
Steering sector gear worn so only turn wheel in one direction, other way gears slipped
Already had all steering parts for steering wheel & shaft removed from tractor
1. Replaced Babbitt flange bearing in support bracket.
2 Installed new sector gear with new bushings and old thrust washers into support bracket
3.Installed support bracket into tractor (most difficult part)
4. Installed exist shaft thro
... Read moreugh support bracket bearing with new bushings & exist thrust washers through to upper support. Aligned gears to center position and secured shaft with new ring clip (not easy either).
5. Attached existing drag link to gear and safety switch to bracket.
6. Mounted exist steering wheel to shaft and tested steering.
NOTE: All parts mounted perfectly EXCEPT I had to chase the threads of the new sector gear to remove paint overflow.
Read less
Did you find this story helpful?
Thank you for voting!
Drag link broken and worn bushings
Reggie from HUNTSVILLE, Texas
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
This is a extensive repair that required the removal of hood, battery, disconnect wiring, removal of steering assembly. Care should be taken to know where bolts are located for proper replacement, mark where wires are attached on dash and don\'t get in a hurry.
Do to age of unit very hard to find parts. Your company stocks what is needed and at a good price. Received parts within 5 days. Had to modify one part (shorten pivot shaft and weld on a stud), easy to do and it works GREAT.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9008334
Manufacturer Part Number: 532104239
Lawn Mower
- Husqvarna Lawn Mower Model 4200-34 (420034, 4200 34) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
