Nut-speed 3290-337

Removed blade & blade clutch cover ran new cable like old one made 1 adjustment

Took the old and spring out and put new ones in.

First removed all 5 bolts that secure front cover. 10mm socket needed. Removed cover. Cut all cable ties from handle bar. Remove old broken cable. Installed new cable and secure with cable ties.

I didn\'t want a mess, so I removed fuel tank and drained oil, oil was old anyway
2- remove cover under deck by taking 2 bolts from top of deck
3- measure the space between mounting clamp and end of cable so you can put it approximately where it belongs.
4- remove old cable you will have to measure the distance at the to ... Read more p of the mower handle and the loosen bolt enough to get cable out of top clamp, you will turn plastic end of cable to release from mower handle
5- replace in same order, put top end on the feed cable back through hole in deck
Note: pay attention to routing of cable under the deck especially because you don\'t want to kink it or have it rubbing on belts or pulley, Photos with the smart phone before you tear it down will be helpful later...

Added a new speed nut