Part Location Diagram of 180022MA Murray Screw,1/4-20x1.00 Hhc
See part H-23 in the diagram
( Grid squares measure 1x1 inch )

Screw,1/4-20x1.00 Hhc 180022MA

Manufactured by:
Murray
ERP Number:
ERP8902232
Part Number:
180022MA
Original Equipment Manufacturer ?
$6.16
Special Order

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Craftsman
  • Murray
  • Briggs and Stratton
This part works with the following products:
  • Snow Blower
  • Trimmer
  • Edger
Part# 180022MA replaces these:
180022MA,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Throttle control broken; Height guide missing, cutting disc & cutting shaft damaged.

John from Rosamond, California

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Replacement of the throttle cable was straightforward, requiring only a Philips screwdriver and pliers.
Replacement of cutting shaft, cutting disc and height guide required removal of the cutting sub assembly from the trimmer but was also straightforward using a socket set. The cutting disc is held on the shaft with a 1/8\" hex set -screw, the only slightly non-standard tool required for the job. Cleaning the set-screw in order to insure you can completely engage the hex wrench is a good idea, as I found considerable torque was needed to break the screw loose.
When replacing the cutting sub assembly on the trimmer, be sure the belt is still properly threaded past the two tensioning pulleys.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8902232
Manufacturer Part Number: 180022MA
Brand Model Number Description
Craftsman 535909600 Snow Blower - Snowblower
Craftsman 536252570 Lawn Tractor - Lawn Tractor
Craftsman 536252571 Lawn Tractor - Lawn Tractor
Craftsman 536297024 Tiller - Tiller
Craftsman 536882090 Snow Blower - 20" Electric Snowblower
Craftsman 536882091 Snow Blower - 20" Electric Snowblower
Craftsman 536882092 Snow Blower - Electric Snowthrower
Craftsman 536882300 Snow Blower - 20 In. 3 H.p. Snowblower
Craftsman 536883200 Snow Blower - 20 In. Snowblower
Craftsman 536884220 Snow Blower - 20" Snowblower
Craftsman 536884231 Snow Blower - Snowblower
Craftsman 536884232 Snow Blower - Snowblower
Craftsman 536884251 Snow Blower - Snowblower
Craftsman 536884252 Snow Blower - Snowblower
Craftsman 536884310 Snow Blower - 20 In - 3 H.p. Snowblower
Craftsman 536884320 Snow Blower - 20" Snowblower
Craftsman 536884351 Snow Blower - Snowblower
Craftsman 536884431 Snow Blower - Snowblower
Craftsman 536884561 Snow Blower - Snowblower
Craftsman 536884580 Snow Blower - Snowblower
Craftsman 536884581 Snow Blower - Snowblower
Craftsman 536884670 Snow Blower - Snowblower
Craftsman 536884681 Snow Blower - Snowblower
Craftsman 536886760 Snow Blower - Snow Blower
Craftsman 536906001 Snow Blower - 26" Snowblower
Craftsman 536918100 Snow Blower - 20 Inch Snowblower
Craftsman 536918101 Snow Blower - 20" Snow Thrower
Craftsman 536918200 Snow Blower - 22-Inch Snow Thrower
Craftsman 536918300 Snow Blower - 24 Inch Snowblower
Murray 620000X30C Snow Blower - Single Stage Snow Thrower